IBM 24R9718 IB manual Change the Default Password

Page 50

6

4.Click Management, under I/O Module Tasks, in the left-hand navigation tree. An I/O Module Management heading appears in the display.

5.Click the link of the physical bay that holds the Server Switch Module that you want to configure. A Bay X heading appears, where X is the number of the bay.

6.Enter an IP address, in the IP address field of the New Static IP Configuration section, for the Server Switch Module.

NOTE: The IP address of the Server Switch Module must fall in the same subnet as the modules in the other bays.

7.Enter a subnet mask, in the Subnet mask field of the New Static IP Configuration section, for the Server Switch Module.

NOTE: The subnet mask of the Server Switch Module must match the subnet mask of the modules in the other bays.

8.Enter a gateway IP address, in the Gateway address field of the New Static IP Configuration section, for the Server Switch Module, then click the Save button.

NOTE: The gateway address of the Server Switch Module must match the gateway address of the modules in the other bays.

9.Open a telnet session to the Server Switch Module with the IP address that you configured in step 6 and log in to your Server Switch Module, then proceed to “Change the Default Password” to secure your Server Switch Module. Log in with the default user name of USERID and password of PASSW0RD, where the 0 in PASSW0RD is a zero.

Example

Switch(IBM BladeCenter)

IBM BladeCenter login: USERID

Password: xxxxxxxx

IBM BladeCenter>

Change the Default Password

Change the default password immediately to secure your Server Switch. To change the default administrative password, perform the following steps:

1.Enter the enable command to enter Privileged Exec mode.

Example

IBM BladeCenter> enable IBM BladeCenter#

Image 50

Contents Part Number 10-00092-02-A0 IBM Part number 24R9718 Page Statement of Limited Warranty Preamble Important NoticePage Contents Xxxi Specifications and Compliance Viii FCC Statement Safety Information Electrical CautionsIBM Support Contact Information General CautionsBefore You Call # /usr/local/topspin/sbin/tvflashContent truncated Topspin Contact InformationXiii Xiv What this Warranty Covers Part 1 General TermsWhat IBM Will Do to Correct Problems What this Warranty Does not CoverHow to Obtain Warranty Service Limitation of Liability Exchange of a Machine or PartYour Additional Responsibilities Jurisdiction Part 2 Country-unique TermsGoverning Law Mexico ColombiaEquador ParaguayAustralia CanadaUnited States Cambodia and LaosJapan Hong Kong S.A.R. of China and Macau S.A.R. of ChinaIndia MalaysiaSingapore Peoples Republic of China PRCPhilippines Xxiii European Union EU France and Belgium AustriaGermany EgyptFrance Slovakia HungaryIreland South AFRICA, NAMIBIA, BOTSWANA, Lesotho and SWA- Ziland Part 3 Warranty InformationWarranty Period United KingdomTypes of Warranty Service Customer Replaceable Unit CRU ServiceEU Country Telephone List Xxx Edition notice TrademarksProduct recycling and disposal Battery return program Important notesIndustry Canada Class a emission compliance statement Electronic emission noticesFederal Communications Commission FCC statement European Union EMC Directive conformance statement Xxxvi Weee Notice Xxxviii Safety Page Xli Xlii Xliii Xliv About the Server Switch Module IntroductionDual-Switch Topology Server Switch Module and HCA Expansion CardsSingle-Switch Topology TopologiesManagement LEDsPort Status LEDs Server Switch Module Status LEDsExternal InfiniBand Ports Install the Server Switch Module Configure the Server Switch ModuleChange the Default Password Configure the System Clock IBM BladeCenter# configure terminalConnect Beyond BladeCenter Synchronize with NTPSubnet-prefix keyword Connecting InfiniBand Cables 1Connecting InfiniBand CablesPush connector toward port Page Safety Certifications EMC/EMI CertificationsElectrical Requirements Environmental RequirementsIndex