Peripherals
Below explanation is necessary for your knowledge before connecting your peripherals.
Some setting up works are required for a certain peripherals
You cannot use some PC peripherals just by connecting it to a PC. Those peripherals require some setting up work after connection. For example, printers and PC cards require “driver installation” work after connecting them. And memory and other peripherals do not require such setting up works. Make sure to consult with this document for the peripheral connection to complete the work correctly.
See also the documents for the peripherals
The peripheral installation methods shown in this document are only a few examples. Make sure to consult with the documents for the peripherals as well as this document.
Use genuine products
See “System Diagram” for the genuine optional device from our company. We cannot guarantee proper function on this PC for the peripherals from other sources. When it is necessary to use the peripheral from the other source, consult with the manufacturer of the product.
Use the peripherals that conform to ACPI standard
This PC is set to ACPI mode for Windows 2000 and Windows 98. Power save and other functions may not work correctly if a peripheral does not conform to ACPI mode.
Notes on installation/removal
The installation of the peripheral must be done after the setting up of an operating system except for a PS/2 mouse. The
Critical Points
When you connect a peripheral to a connector, make sure that the direction of the connection is correct and connect straight.
When you connect more than one peripherals, complete setting for each peripherals before installing others.
36