
1Switch the PC power off and disconnect the AC adapter.
2Close the LCD display and turn the PC over.
3Remove the two screws and remove the extended RAM module slot cover. Remove the extended RAM module slot cover that is mounted on the PC rear surface.
Slot cover |
4Remove the memory.
Press outwards the two tabs that hold the memory and take the memory out.
Tab
Memory
5Install the new memory.
Fit the notch in the memory to the lug on the connector and firmly insert the memory in a diagonal direction until you hear a click.
6Install the extended RAM module slot cover.
Install the cover that was removed in Step 3.
Slot cover |
Notch
IMPORTANT NOTE
•Incorrect installation of a memory may cause a message “Extended memory error” or the screen will display nothing after switching the power on. In this case switch the PC power off using the MAIN switch and
44