Fujitsu S4545, S4546 manual Mobile Multi-Bay Units, Before Replacing Mobile Multi-bay Unit

SECTION 2

4 Mobile Multi-Bay Units

Critical Points

￿For the details on the units available for the PC, refer to page 35 for “Options”

IMPORTANT NOTE

When using a mobile multi-bay unit, pay attention to the following instruction to avoid failures:

￿The built-in CD-ROM drive unit, the built-in DVD-ROM drive unit, the built-in CD-R/RW drive unit, and the built-in Superdisk drive unit are very delicate devices in which disks spin at high speeds. When you are accessing a disk, do not carry the PC nor give it any shock or vibration. It may cause the drive unit and/or the data to be damaged.

￿Do not store the units in a place where it becomes extremely hot or cold or the environmental temperature drastically changes.

￿Do not expose the units in the direct sunlight and keep them away from a heater.

￿Do not store the units in a place where they undergo shocks and vibrations.

￿Do not use the units in a highly humid and/or dusty place.

￿Do not use the units leaving any liquid or metal objects inside. If a unit has a foreign matter inside, contact your dealer or Fujitsu Service Center.

￿Wipe off stains with a dry, soft cloth or a soft cloth damped with neutral detergent diluted by water. Avoid use of volatile chemicals such as benzine and thinner.

￿Do not disassemble the units.

￿Do not store or use the units near a magnet or a machine that generates a magnetic field.

❒Before Replacing Mobile Multi-bay Unit

Some operation systems may allow you to replace a mobile multi-bay unit while the PC power is on.

Critical Points

￿Prior to removing the built-in PC card unit, remove the PC card from the PC card slot.

￿Prior to removing the CCD camera, exit from the applications that use the camera.

￿Prior to removing the additional built-in battery unit, ensure that the built-in battery has enough power. Otherwise connect the AC adapter in advance.

SECTION 2

45