Fujitsu S4546 CD-ROM Drive, Setting/Removing CD, Place a CD on it, Gently push the tray inward

SECTION 2

5 CD-ROM Drive

IMPORTANT NOTE

Be careful for the following points in the use of a CD to avoid failure.

•Do not use a boll-point pen or a pencil on label surface (printed surface) to write letters. And do not attach a label on it.

•Do not touch or damage the data surface.

•Do not bend or put a heavy object on a CD.

•Wipe dew drop and dirt on a CD with a dry soft cloth from the center to the outer side (Do not use cleaner or other chemicals).

•Be careful not to splash coffee and other liquid.

•Do not store in a hot or cold place.

•Do not store in a humid or dusty place.

Setting/Removing CD

This section describes how to set/remove a CD.

1 Press the EJECT button.	2 Manually draw the tray gently (1) and
The tray pops out a little.	place a CD on it (2).
	While retaining the tray by one hand, press
	the CD down with the label side facing
	upward until you hear a click from the lug in
	the center of the tray.

2

EJECT button

1

3. Gently push the tray inward.

48