IBM 6824, 2289 manual Installing external options

Page 18

vWhen you install a new option, touch the static-protective package containing the option to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity in the package and your body.

vWhen possible, remove the option and install it directly in the computer without setting the option down. When this is not possible, place the static-protective package that the option came in on a smooth, level surface and place the option on it.

vDo not place the option on the computer cover or other metal surface.

Installing external options

This section shows the various external connectors on your computer to which you can attach external options, such as external speakers, a printer, or a scanner. For some external options, you must install additional software in addition to making the physical connection. When adding an external option, use the information in this section to identify the required connector, and then use the instructions that come with the option to help you make the connection and install any software or device drivers that are required for the option.

6User Guide

Image 18

Contents User Guide Type 2289 Page User Guide Type 2289 Page Appendix B. Manual modem Iv User Guide Safety Information To connect To disconnectLithium battery notice Modem safety informationConnexion Déconnexion Laser compliance statement Consignes de sécurité relatives au modemViii User Guide Overview Information resourcesUser Guide Installing options FeaturesAudio subsystem Security features Specifications Available options Tools requiredHandling static-sensitive devices Installing external options Locating the connectors on the front of your computer Locating the connectors on the rear of your computer Connector Description Obtaining device driversRemoving the cover Locating components Identifying parts on the system boardInstalling memory What to do next Installing adapters Installing internal drives Drive specifications Installing a drive Connecting the first IDE CD-ROM drive or DVD-ROM drive Connecting an additional IDE CD-ROM drive or DVD-ROM drive Physical securityChanging the battery Replacing the cover and connecting the cables Erasing a lost or forgotten password clearing Cmos Installing options User Guide Viewing and changing settings Using the IBM Setup Utility programStarting the IBM Setup Utility program Exiting from the IBM Setup Utility programSetting, changing, and deleting a password User passwordAdministrator password Using Security Profile by DeviceSelecting a startup device Selecting a temporary startup deviceChanging the startup device sequence User Guide Appendix A. Updating System Programs Updating flashing Bios from a disketteUpdating flashing Bios from your operating system System programsRecovering from a POST/BIOS update failure Appendix B. Manual modem commands Basic AT commandsExtended AT commands US setting for off-hook-to-on-hook ratio Guard tone disabledEnable RTS/CTS hardware flow control Force DSR Signal High onMNP/V.42/V.42bis/V.44 commands Fax Class 1 commandsFax Class 2 commands Voice commands User Guide Address map Appendix C. System address mapsSystem memory map Address range Address range hex Size Description DecimalLPT3 DMA I/O address map Address hex Description Bits Byte pointerAddress hex Description Bits Byte pointer System resource DMA channel Data width System resourceUser Guide Appendix E. Notices Television output noticeTrademarks IBMIndex DVDPage Page Part Number 49P1040