Fujitsu MB2198-130 operation manual Connections

Page 24

Chapter 4 Connections

This chapter explains how to connect individual devices before turning their power on.

4.1Connecting the Adapter Board to the Emulator

4.2Connecting the Adapter Board with the Header Board

4.3Installing the Evaluation MCU

4.4Installing the Memory Board

4.5Installing a Bypass Capacitor for DVCC

Note : Shut off power to the entire system before starting the operations descried in this chapter. Performing such operations with the power on may result in electric shock or device faults.

When unplugging any cable, remove it while holding the case connector without pulling the cable itself. Do not force any cable to bend, or it may break.

17

Image 24

Contents DSU-FR emulator Page Using the product safely Warranty and Liability DisclaimersProduct Operating Environment Organization of this manual Related ManualsConnect the cable core, resulting in a fault Vention mechanism of the socket, resulting in a faultSuch pointed parts Tric field for an extended period of timePage Contents Product Overview and Handling Precautions Overview OverviewChecking the Items Packaged Checking the Items PackagedOptions Options1 Options Name Part numberHandling Precautions Storing Precautions1 Operating and Storage Environments Temperature Humidity Memo Product Description System Configuration System ConfigurationAppearance and Part Names Appearance and Part NamesProduct Description ➀ Emulator connector ➂ Memory size select switch➄ Reset signal setting jumper plugs ➅ Memory board connectorGeneral Specifications 1 lists the general specifications of the adapterGeneral Specifications 1 General SpecificationsMemo Functions This chapter describes the functions of the adapterFunction Specifications Function SpecificationsConnector and IC Socket Specifications Connector and Socket Specifications1 Connector and IC Socket Specifications Memo Connections Connecting the Adapter Board to the Emulator Connecting the Adapter Board and the EmulatorConnecting the Adapter Board with the Header Board Connecting the Adapter Board to the Header BoardInstalling the Evaluation MCU Installing the Evaluation MCUMounting Position Uninstalling the evaluation MCU Securing the Evaluation MCUInstalling the Memory Board Memory board Clips Memory board connectorMemory board Memory board connector Unite a positionUninstalling the Memory Board Securing the Memory BoardMemory board Installing a Bypass Capacitor for Dvcc Installing a Bypass CapacitorIndex − Capacitor Long pin is plus polarity Capacitor mounting socketUsage Setting up the Evaluation MCU Power Supply Setting up the Evaluation MCU Power Supply1 Jumper Plug Settings VSEL1Setting the Clock Supply Circuit Installing the OscillatorSetting the Clock Selector Jumper Plugs X0/X1Setting a Reset Signal Setting the Reset signalSetting a External Memory Emulation Setting the Memory Size Select SwitchSetting the Memory Connective Switches SW4Power-on/Shutdown Procedures Power-on ProcedureShutdown Procedure 2 Dialog DisplayGeneral Cautions on the Adapter Page Appendix User Interface Specifications User Interface SpecificationsAdapter board Header or a user system Flat cable connector Connector is mounted Surface BackTable A-1 Pinouts of Flat Cable Connector a Table A-2 Pinouts of Flat Cable Connector B SS01-71047-1E Fujitsu Semiconductor Support Sysyem