Fujitsu MB2198-130 Such pointed parts, Tric field for an extended period of time, This manual

Page 5

CAUTION

Indicates a potentially hazardous situation which, if not avoided appropriately, may result in minor or moderate injury and/or damage to the product or the equipment to which the product is connected, to software resources such as data, or to other properties.

 

Before moving the product, be sure to turn off all the power supplies and unplug the

Cuts, Damage

cables. Watch your steps when carrying the product. Do not use the product at an

 

unstable location such as a place exposed to strong vibration or a sloping surface.

 

Doing so may let the product fall, resulting in an injury or fault.

 

 

Cuts

The product has some sharp-pointed or edged parts inevitably exposed, such as

jumper plugs. Use meticulous care in handling the product not to get injured with

 

such pointed parts.

 

 

Damage

Neither put anything on or apply shock to the product. Once the product has been

powered, do not carry it. Doing either may cause a fault due to a load or shock.

 

 

 

 

Since the product contains many electronic components, keep it away from direct

Damage

sunlight, high temperature, and high humidity to prevent condensation. Do not use

or store the product where it is exposed to much dust or a strong magnetic or elec-

 

tric field for an extended period of time.

 

An adverse operating or storage environment can cause a fault.

 

 

Damage

Use the product within the ranges of its general specifications.

Operating it outside the range of any general specification may cause a fault.

 

 

 

Damage

To prevent electrostatic breakdown, do not let your finger or an object touch any

metal part of the connector. Before handling the product, touch a metal object (such

 

as a door knob) to discharge static electricity from your body.

 

 

 

When turning the power on or off, follow the relevant procedure described in this

Damage

manual. Before turning the power on, in particular, be sure to finish making all the

required connections. To set up and use the product, follow the instructions given

 

in this manual.

 

Using the product incorrectly or inappropriately may cause a fault.

 

 

 

Before plugging or unplugging any cable for this product, be sure to turn the power

Damage

supply off. When unplugging the cable, remove it while holding the connector with-

out pulling the cable itself. Pulling the cable itself or bending it may expose or dis-

 

 

connect the cable core, resulting in a fault.

 

 

 

Although the MCU socket is structured not to accept an evaluation MCU in a wrong

Damage

orientation or position, pay due attention to the mounting orientation when mounting

the evaluation MCU. Forcing the evaluation MCU to be inserted in a wrong orienta-

 

tion can damage the pins of the evaluation MCU and the accidental insertion pre-

 

vention mechanism of the socket, resulting in a fault.

 

 

Damage

When stored, the product should be kept in its packaging box as it has no housing.

Re-transporting the product may damage it to cause a fault. Keep the packaging

 

materials used for shipment of the product and use them when re-transporting it.

 

 

iii

Page 4 Page 6
Image 5
Page 4 Page 6
Contents DSU-FR emulator Page Product Operating Environment Using the product safelyWarranty and Liability Disclaimers Related Manuals Organization of this manualVention mechanism of the socket, resulting in a fault Connect the cable core, resulting in a faultSuch pointed parts Tric field for an extended period of timePage Contents Product Overview and Handling Precautions Overview OverviewChecking the Items Packaged Checking the Items PackagedOptions Options1 Options Name Part number1 Operating and Storage Environments Temperature Humidity Handling PrecautionsStoring Precautions Memo Product Description System Configuration System ConfigurationAppearance and Part Names Appearance and Part Names➂ Memory size select switch Product Description ➀ Emulator connector➄ Reset signal setting jumper plugs ➅ Memory board connector1 lists the general specifications of the adapter General SpecificationsGeneral Specifications 1 General SpecificationsMemo This chapter describes the functions of the adapter FunctionsFunction Specifications Function Specifications1 Connector and IC Socket Specifications Connector and IC Socket SpecificationsConnector and Socket Specifications Memo Connections Connecting the Adapter Board and the Emulator Connecting the Adapter Board to the EmulatorConnecting the Adapter Board to the Header Board Connecting the Adapter Board with the Header BoardMounting Position Installing the Evaluation MCUInstalling the Evaluation MCU Securing the Evaluation MCU Uninstalling the evaluation MCUMemory board Clips Memory board connector Installing the Memory BoardMemory board Memory board connector Unite a positionMemory board Uninstalling the Memory BoardSecuring the Memory Board Installing a Bypass Capacitor Installing a Bypass Capacitor for DvccIndex − Capacitor Long pin is plus polarity Capacitor mounting socketUsage Setting up the Evaluation MCU Power Supply Setting up the Evaluation MCU Power SupplyVSEL1 1 Jumper Plug SettingsInstalling the Oscillator Setting the Clock Supply CircuitX0/X1 Setting the Clock Selector Jumper PlugsSetting the Reset signal Setting a Reset SignalSetting the Memory Size Select Switch Setting a External Memory EmulationSW4 Setting the Memory Connective SwitchesPower-on Procedure Power-on/Shutdown Procedures2 Dialog Display Shutdown ProcedureGeneral Cautions on the Adapter Page User Interface Specifications Appendix User Interface SpecificationsConnector is mounted Surface Back Adapter board Header or a user system Flat cable connectorTable A-1 Pinouts of Flat Cable Connector a Table A-2 Pinouts of Flat Cable Connector B Fujitsu Semiconductor Support Sysyem SS01-71047-1E
Top Page Image Contents