Fujitsu MB2198-130 operation manual Power-on/Shutdown Procedures, Power-on Procedure

Page 40

Chapter 5 Usage

5.5 Power-on/Shutdown Procedures

Finish connecting all the components of your entire system, then turn them on in the order: host machine -> emulator -> user system.

Shut down your system by turning off the components in the order: user system -> emulator -> host machine.

■Power-on Procedure

To turn the power on, finish making all the required connections and follow the procedure in Figure 5.5-1.

To turn on the emulator, press the power switch on the back of the emulator. The power switch re- mains depressed.

Check the position of the power switch with the hardware manual for the emulator.

Note : When turning on the individual components of your system, follow the power-on procedure specified in the manual.

Once you have turned the adapter on, do not carry it or apply shock or vibration to it.

The power supply of a host computer is switched on.

The power supply of an emulator is switched on.

POWER LED lights up

“SOFTUNE Workbench” is started.

“Emulator Debugger” is started.

Adialog display is checked (see Figure 5.5-2).

The power supply of a user system is switched on.

"OK" is checked by dialog display (see Figure 5.5-2).

Figure 5.5-1 Power-on Procedure

33

Image 40

Contents DSU-FR emulator Page Warranty and Liability Disclaimers Using the product safelyProduct Operating Environment Organization of this manual Related ManualsConnect the cable core, resulting in a fault Vention mechanism of the socket, resulting in a faultSuch pointed parts Tric field for an extended period of timePage Contents Product Overview and Handling Precautions Overview OverviewChecking the Items Packaged Checking the Items PackagedOptions Options1 Options Name Part numberStoring Precautions Handling Precautions1 Operating and Storage Environments Temperature Humidity Memo Product Description System Configuration System ConfigurationAppearance and Part Names Appearance and Part NamesProduct Description ➀ Emulator connector ➂ Memory size select switch➄ Reset signal setting jumper plugs ➅ Memory board connectorGeneral Specifications 1 lists the general specifications of the adapterGeneral Specifications 1 General SpecificationsMemo Functions This chapter describes the functions of the adapterFunction Specifications Function SpecificationsConnector and Socket Specifications Connector and IC Socket Specifications1 Connector and IC Socket Specifications Memo Connections Connecting the Adapter Board to the Emulator Connecting the Adapter Board and the EmulatorConnecting the Adapter Board with the Header Board Connecting the Adapter Board to the Header BoardInstalling the Evaluation MCU Installing the Evaluation MCUMounting Position Uninstalling the evaluation MCU Securing the Evaluation MCUInstalling the Memory Board Memory board Clips Memory board connectorMemory board Memory board connector Unite a positionSecuring the Memory Board Uninstalling the Memory BoardMemory board Installing a Bypass Capacitor for Dvcc Installing a Bypass CapacitorIndex − Capacitor Long pin is plus polarity Capacitor mounting socketUsage Setting up the Evaluation MCU Power Supply Setting up the Evaluation MCU Power Supply1 Jumper Plug Settings VSEL1Setting the Clock Supply Circuit Installing the OscillatorSetting the Clock Selector Jumper Plugs X0/X1Setting a Reset Signal Setting the Reset signalSetting a External Memory Emulation Setting the Memory Size Select SwitchSetting the Memory Connective Switches SW4Power-on/Shutdown Procedures Power-on ProcedureShutdown Procedure 2 Dialog DisplayGeneral Cautions on the Adapter Page Appendix User Interface Specifications User Interface SpecificationsAdapter board Header or a user system Flat cable connector Connector is mounted Surface BackTable A-1 Pinouts of Flat Cable Connector a Table A-2 Pinouts of Flat Cable Connector B SS01-71047-1E Fujitsu Semiconductor Support Sysyem