Chapter 2 Product Description
➀Emulator connector
This connector accepts the emulator (Mounted on the rear side).
➁IC socket for evaluation MCU
➂Memory size select switch
This switch sets the capacity of the memory board to use
➃DVCC bypass capacitor sockets
These sockets accept bypass capacitors to be inserted between DVCC and GND pins.
➄Reset signal setting jumper plugs
These jumper plugs are used to set the reset signal supply origin.
➅Memory board connector
This connector accepts a memory board (for
➆Flat cable connectors
Use the bundled flat cables to connect the header to the adapter board (Mounted on the rear side).
➇Memory connective switches
These switches disconnect buffers so that signal conductors can be used without being loaded when
➈Jumper plugs for setting the evaluation MCU power supply
These jumper plugs are used to make settings for the evaluation MCU.
➉Clock input IC sockets and clock input select jumper plugs
The IC sockets accept an oscillator and a capacitor for the main clock and subclock; the jumper plugs are used to set the clock supply source.
10