Fujitsu MB2198-130 operation manual Appendix User Interface Specifications

Page 44

APPENDIX User Interface Specifications

This appendix describes the user interface specifications of the adapter board.

■User Interface Specifications

Figure A-1 shows the correspondence between the pin numbers of flat cable connectors A and B of the adapter board and those of the header or user system. Table A-1 and table A-2 lists the pinouts of flat cable connectors A and B and the evaluation MCU.

Note that the evaluation MCU signal names in the table are tentative names and their actual signal names vary with each model. The actual evaluation MCU signal names can be judged from the eval- uation MCU pin numbers. For details, Please ask, when unknown.

Each signal name of the evaluation MCU has the following meaning. See the notes that follow as well.

•Vcc_A : Internal power supply of the evaluation MCU (or the C pin).

•Vcc_B : I/O power supply of the evaluation MCU (or a single power supply).

• VCCXTL	: Main clock power supply of the evaluation MCU.
• GND	: Ground of the evaluation MCU.

Note : To the pins whose evaluation MCU signal name is underlined in the table, an additional circuit may be added for controlling the evaluation MCU. Therefore, those pins have different electrical characteristics from those on the actual MCU.

See the sections listed below for details on the additional circuit for each signal.

• P65/P85/PD3/PF2(DVcc)	: See Section 4.5	"Installing a Bypass Capacitor for DVCC."
• X0/X1	: See Section 5.2	"Setup for Clock Supply."
• X0A/X1A(PF5/PF6)	: See Section 5.2	"Setup for Clock Supply."
• P54(RDX)	: See Section 5.4	"Setup for External-Memory Emulation."
P4[5:0](A[21:16])
P3[7:0](A[15:8])
P2[7:1](A[7:1])
P1[7:0](D[15:8])
P0[7:0](D[7:0])

The emulator uses Vcc_A and Vcc_B mainly as the power supplies to the evaluation MCU and addi- tionally for voltage detection purposes only; it does not contain circuit consuming large power.

It is advisable to use the flat cable (standard) bundled with the emulator to prevent noise trouble. Provide the user system with a connector equivalent to the flat cable connector. The part number of the flat cable connector is as follows:

•Flat cable connector part number: 8930E-100-178MS (manufactured by KEL)

Notice that the pinouts of flat cable connectors A and B are different between the adapter board and the user system.

37

Image 44

Contents DSU-FR emulator Page Product Operating Environment Using the product safelyWarranty and Liability Disclaimers Organization of this manual Related ManualsConnect the cable core, resulting in a fault Vention mechanism of the socket, resulting in a faultSuch pointed parts Tric field for an extended period of timePage Contents Product Overview and Handling Precautions Overview OverviewChecking the Items Packaged Checking the Items PackagedOptions Options1 Options Name Part number1 Operating and Storage Environments Temperature Humidity Handling PrecautionsStoring Precautions Memo Product Description System Configuration System ConfigurationAppearance and Part Names Appearance and Part NamesProduct Description ➀ Emulator connector ➂ Memory size select switch➄ Reset signal setting jumper plugs ➅ Memory board connectorGeneral Specifications 1 lists the general specifications of the adapterGeneral Specifications 1 General SpecificationsMemo Functions This chapter describes the functions of the adapterFunction Specifications Function Specifications1 Connector and IC Socket Specifications Connector and IC Socket SpecificationsConnector and Socket Specifications Memo Connections Connecting the Adapter Board to the Emulator Connecting the Adapter Board and the EmulatorConnecting the Adapter Board with the Header Board Connecting the Adapter Board to the Header BoardMounting Position Installing the Evaluation MCUInstalling the Evaluation MCU Uninstalling the evaluation MCU Securing the Evaluation MCUInstalling the Memory Board Memory board Clips Memory board connectorMemory board Memory board connector Unite a positionMemory board Uninstalling the Memory BoardSecuring the Memory Board Installing a Bypass Capacitor for Dvcc Installing a Bypass CapacitorIndex − Capacitor Long pin is plus polarity Capacitor mounting socketUsage Setting up the Evaluation MCU Power Supply Setting up the Evaluation MCU Power Supply1 Jumper Plug Settings VSEL1Setting the Clock Supply Circuit Installing the OscillatorSetting the Clock Selector Jumper Plugs X0/X1Setting a Reset Signal Setting the Reset signalSetting a External Memory Emulation Setting the Memory Size Select SwitchSetting the Memory Connective Switches SW4Power-on/Shutdown Procedures Power-on ProcedureShutdown Procedure 2 Dialog DisplayGeneral Cautions on the Adapter Page Appendix User Interface Specifications User Interface SpecificationsAdapter board Header or a user system Flat cable connector Connector is mounted Surface BackTable A-1 Pinouts of Flat Cable Connector a Table A-2 Pinouts of Flat Cable Connector B SS01-71047-1E Fujitsu Semiconductor Support Sysyem