Fujitsu MB2198-130 operation manual Connecting the Adapter Board with the Header Board

Page 26

Chapter 4 Connections

4.2 Connecting the Adapter Board with the Header Board

Connect the adapter board with the header board using a flat cable coming with the adapter as illustrated in Figure 4.2-1.

■Connecting the Adapter Board to the Header Board

Adapter board

Flat cable	Flat cable
connector A	connector B

Eject lock

Flat cable

Eject lock

Flat cable									Flat cable
connector A								connector B




				Header board

•To connect the flat cable, insert each of its connectors into the mating connector on each board until the eject lock of the cable’s connector locks into place in the board’s connector.

•To disconnect the flat cable, pinch the eject lock of each of its connectors to unlock the con- nector and unplug the cable.

Figure 4.2-1 Connecting the Adapter Board with the Header Board

Note : Before plugging or unplugging the cable, turn off the power supply.

When unplugging the cable, remove it while holding the case connector without pulling the cable itself.

19

Image 26

Contents DSU-FR emulator Page Product Operating Environment Using the product safelyWarranty and Liability Disclaimers Organization of this manual Related ManualsSuch pointed parts Connect the cable core, resulting in a faultVention mechanism of the socket, resulting in a fault Tric field for an extended period of timePage Contents Product Overview and Handling Precautions Overview OverviewChecking the Items Packaged Checking the Items Packaged1 Options OptionsOptions Name Part number1 Operating and Storage Environments Temperature Humidity Handling PrecautionsStoring Precautions Memo Product Description System Configuration System ConfigurationAppearance and Part Names Appearance and Part Names➄ Reset signal setting jumper plugs Product Description ➀ Emulator connector➂ Memory size select switch ➅ Memory board connectorGeneral Specifications General Specifications1 lists the general specifications of the adapter 1 General SpecificationsMemo Functions This chapter describes the functions of the adapterFunction Specifications Function Specifications1 Connector and IC Socket Specifications Connector and IC Socket SpecificationsConnector and Socket Specifications Memo Connections Connecting the Adapter Board to the Emulator Connecting the Adapter Board and the EmulatorConnecting the Adapter Board with the Header Board Connecting the Adapter Board to the Header BoardMounting Position Installing the Evaluation MCUInstalling the Evaluation MCU Uninstalling the evaluation MCU Securing the Evaluation MCUMemory board Memory board connector Installing the Memory BoardMemory board Clips Memory board connector Unite a positionMemory board Uninstalling the Memory BoardSecuring the Memory Board Index − Capacitor Long pin is plus polarity Installing a Bypass Capacitor for DvccInstalling a Bypass Capacitor Capacitor mounting socketUsage Setting up the Evaluation MCU Power Supply Setting up the Evaluation MCU Power Supply1 Jumper Plug Settings VSEL1Setting the Clock Supply Circuit Installing the OscillatorSetting the Clock Selector Jumper Plugs X0/X1Setting a Reset Signal Setting the Reset signalSetting a External Memory Emulation Setting the Memory Size Select SwitchSetting the Memory Connective Switches SW4Power-on/Shutdown Procedures Power-on ProcedureShutdown Procedure 2 Dialog DisplayGeneral Cautions on the Adapter Page Appendix User Interface Specifications User Interface SpecificationsAdapter board Header or a user system Flat cable connector Connector is mounted Surface BackTable A-1 Pinouts of Flat Cable Connector a Table A-2 Pinouts of Flat Cable Connector B SS01-71047-1E Fujitsu Semiconductor Support Sysyem