Fujitsu P310, P301 Transporting the PC, Cleaning the PC, Cleaning the system unit and the monitor

Page 10

￿Transporting the PC

CAUTION

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site. Do not unpack them until all transportation manoeuvres are completed.

Never drop the monitor!

￿Cleaning the PC

CAUTION

Turn off all power and equipment switches and remove the power plug from the mains supply. Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the system.

Ensure that the ventilation areas of the system unit and the monitor are free.

Cleaning the system unit and the monitor

Wipe the system unit and monitor casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out.

Cleaning the keyboard and the mouse

Use disinfectant wipes to clean the keyboard and the mouse.

The mouse mechanism and the mouse ball can be cleaned by removing the retaining ring on the underside of the mouse.

Additional information can be found in the documentation for your keyboard and mouse.

x

Image 10
Contents Deskpower P300 Series User’s Manual Model P301 / P310 Important safety instructions Iii Before reading this manual For Safe OperationUsing this Product for High-Safety Applications Backing Up the DataMicrosoft Service Pack Introduction Conventions Used in This ManualNotational conventions Manufacturer’s notes SafetyImportant Notes Energy savingFCC Class B Compliance Statement Cleaning the keyboard and the mouse Cleaning the PCCleaning the system unit and the monitor Transporting the PCDisposal and recycling Reference to productsXii Organization of This Manual Before Reading This ManualContents Technical Data System ExpansionsXvi Chapter Unpacking and Checking the Delivery Steps for Initial SetupPreparing for Use External devicesConnecting standard keyboard Setting Up the PCConnecting the keyboard Connect the Monitor, Mouse and KeyboardConnecting a PS/2 mouse Connecting the mouseConnecting USB mouse Devices without main power switch Connecting the PC to the Mains VoltageDevices with main power switch Notch for inserting the screwdriverInitial Switch-on Software will be Installed Switching on monitor and PCInstalling the software Connecting cables Connecting External DevicesDisconnecting cables LAN Connections on the system unitSettings of the serial port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the parallel portOperation On devices without main power switch Switching On the PCOn devices with main power switch OperationSwitching Off the PC Power-on indicator Indicators on the PCHard disk indicator Floppy disk indicatorKeyboard Point Floppy Disks Working with Floppy DisksProperty and Data Protection Settings in Bios SetupAccess Protection Under Windows Anti-theft protectionBios Setup Security Functions Page Troubleshooting Tips Mains voltage supply is faulty Troubleshooting and TipsInstalling New Software Internal power supply overloadedScreen stays blank Wrong monitor has been set under Windows 2000/XP No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong RAM modules have been insertedTips PC cannot be switched off with the power buttonTime and/or Date is Not Correct Out of system resourcesPage System Expansion System Expansions Information about boardsOpening the casing Closing the casingInstalling a board Installing and removing a boardTake the new board out of its packaging Page Removing a board Page Mounting slot adapter Installing an Additional Serial PortLow-Profile boards Removing slot adapterInstalling and Removing the Hard Disk Drives Removing a hard disk driveInstalling a hard disk drive Replacing Lithium Battery Page Technical Data Deskpower P300 Electrical Data