■Setting Up the PC
CAUTION
When installing your PC, give consideration to the recommendations and safety notes.
Set up the PC only in its correct orientation. The points to observe are illustrated on the following pages.
We recommend that you place your equipment on a surface with good
Do not expose the PC to extreme environmental conditions (see chapter "Technical data") and protect it from dust, humidity and heat.
Provide at least 200 mm of clearance on the left, in front of and behind the ventilator area of the system unit to ensure adequate ventilation. Do not cover the ventilation areas of the monitor and the system unit.
Do not place several system units one above the other.
■Connect the Monitor, Mouse and Keyboard
The ports for monitor, mouse and keyboard are on the rear and on the front of the system unit.
PS/2 keyboard port / purple | PS/2 mouse port / green |
Monitor port / blue
USB port / black
Connecting the keyboard
Connecting standard keyboard
Use the supplied keyboard cable only.
●Plug the round keyboard cable connector into the port marked with this symbol on the system unit.
3