Fujitsu P301, P310 user manual

Page 47

5Make the required settings for the board.

6Push the board up to its slot (1).

Ensure that the end of a long board without angle bracket fits into the corresponding guide of the casing.

7Press the board into the slot so that it engages.

8Fasten the board into place with the screw (2).

9If necessary, connect the cables.

10Close the casing (see "Closing the casing").

If you have installed or removed a PCI board, please check the relevant PCI slot settings in the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI board documentation.

Image 47

Contents Deskpower P300 Series User’s Manual Model P301 / P310 Important safety instructions Iii For Safe Operation Before reading this manualBacking Up the Data Using this Product for High-Safety ApplicationsMicrosoft Service Pack Notational conventions Conventions Used in This ManualIntroduction Energy saving SafetyImportant Notes Manufacturer’s notesFCC Class B Compliance Statement Transporting the PC Cleaning the PCCleaning the system unit and the monitor Cleaning the keyboard and the mouseReference to products Disposal and recyclingXii Before Reading This Manual Organization of This ManualContents System Expansions Technical DataXvi Chapter External devices Steps for Initial SetupPreparing for Use Unpacking and Checking the DeliveryConnect the Monitor, Mouse and Keyboard Setting Up the PCConnecting the keyboard Connecting standard keyboardConnecting USB mouse Connecting the mouseConnecting a PS/2 mouse Notch for inserting the screwdriver Connecting the PC to the Mains VoltageDevices with main power switch Devices without main power switchSwitching on monitor and PC Initial Switch-on Software will be InstalledInstalling the software Disconnecting cables Connecting External DevicesConnecting cables Connections on the system unit LANSettings of the parallel port Connecting external devices to the serial portConnecting external devices to the parallel port Settings of the serial portOperation Operation Switching On the PCOn devices with main power switch On devices without main power switchSwitching Off the PC Floppy disk indicator Indicators on the PCHard disk indicator Power-on indicatorKeyboard Point Working with Floppy Disks Floppy DisksAnti-theft protection Settings in Bios SetupAccess Protection Under Windows Property and Data ProtectionBios Setup Security Functions Page Troubleshooting Tips Internal power supply overloaded Troubleshooting and TipsInstalling New Software Mains voltage supply is faultyScreen stays blank Wrong RAM modules have been inserted No Mouse Pointer Displayed on the ScreenFloppy Disk Cannot be Read or Written Wrong monitor has been set under Windows 2000/XPOut of system resources PC cannot be switched off with the power buttonTime and/or Date is Not Correct TipsPage System Expansion Information about boards System ExpansionsClosing the casing Opening the casingTake the new board out of its packaging Installing and removing a boardInstalling a board Page Removing a board Page Removing slot adapter Installing an Additional Serial PortLow-Profile boards Mounting slot adapterRemoving a hard disk drive Installing and Removing the Hard Disk DrivesInstalling a hard disk drive Replacing Lithium Battery Page Technical Data Electrical Data Deskpower P300