Fujitsu P310, P301 user manual Electrical Data, Deskpower P300

Page 56

Electrical Data

 

DESKPOWER P300

Rated voltage range: (selectable)

100 V -127 V / 200 V - 240 V

 

 

Frequency:

50 Hz -60 Hz

 

 

Max. rated current

 

• Casing with monitor socket

100 V -127 V / 6,0 A

 

200 V -240 V / 3.0 A

• Monitor socket (output)

100 V -127 V / 3.0 A

 

200 V -240 V / 1,5 A

Dimensions

 

Width/depth/height:

202 mm/376 mm/372 mm

 

 

Weight

 

with the basic configuration

11 kg in basic configuration

 

 

Environmental conditions

 

Environment class 3K2

DIN IEC 721 part 3-3

Environment class 2K2

DIN IEC 721 part 3-2

 

 

Temperature:

 

• Operating (3K2)

15 °C .... 35 °C

• Transport (2K2)

-25 °C .... 60 °C

 

 

Condensation in operating must be

 

avoided.

 

Clearance required to ensure adequate

 

ventilation:

 

• left

min. 200 mm

• front

min. 200 mm

• rear

min. 200 mm

40

Image 56
Contents Deskpower P300 Series User’s Manual Model P301 / P310 Important safety instructions Iii Before reading this manual For Safe OperationUsing this Product for High-Safety Applications Backing Up the DataMicrosoft Service Pack Notational conventions Conventions Used in This ManualIntroduction Safety Important NotesManufacturer’s notes Energy savingFCC Class B Compliance Statement Cleaning the PC Cleaning the system unit and the monitorCleaning the keyboard and the mouse Transporting the PCDisposal and recycling Reference to productsXii Organization of This Manual Before Reading This ManualContents Technical Data System ExpansionsXvi Chapter Steps for Initial Setup Preparing for UseUnpacking and Checking the Delivery External devicesSetting Up the PC Connecting the keyboardConnecting standard keyboard Connect the Monitor, Mouse and KeyboardConnecting USB mouse Connecting the mouseConnecting a PS/2 mouse Connecting the PC to the Mains Voltage Devices with main power switchDevices without main power switch Notch for inserting the screwdriverInitial Switch-on Software will be Installed Switching on monitor and PCInstalling the software Disconnecting cables Connecting External DevicesConnecting cables LAN Connections on the system unitConnecting external devices to the serial port Connecting external devices to the parallel portSettings of the serial port Settings of the parallel portOperation Switching On the PC On devices with main power switchOn devices without main power switch OperationSwitching Off the PC Indicators on the PC Hard disk indicatorPower-on indicator Floppy disk indicatorKeyboard Point Floppy Disks Working with Floppy DisksSettings in Bios Setup Access Protection Under WindowsProperty and Data Protection Anti-theft protectionBios Setup Security Functions Page Troubleshooting Tips Troubleshooting and Tips Installing New SoftwareMains voltage supply is faulty Internal power supply overloadedScreen stays blank No Mouse Pointer Displayed on the Screen Floppy Disk Cannot be Read or WrittenWrong monitor has been set under Windows 2000/XP Wrong RAM modules have been insertedPC cannot be switched off with the power button Time and/or Date is Not CorrectTips Out of system resourcesPage System Expansion System Expansions Information about boardsOpening the casing Closing the casingTake the new board out of its packaging Installing and removing a boardInstalling a board Page Removing a board Page Installing an Additional Serial Port Low-Profile boardsMounting slot adapter Removing slot adapterInstalling and Removing the Hard Disk Drives Removing a hard disk driveInstalling a hard disk drive Replacing Lithium Battery Page Technical Data Deskpower P300 Electrical Data