Inova OnTimeTM owner manual Cantilever Mounting Single or Double

Page 11

Inova OnTime Digital Clock Owner's Manual

Cantilever Mounting – Single or Double

The following is a recommended procedure for cantilever mounting. This procedure requires a mounting kit, Model ONTKIT.

Figure 2: Cantilever Mounting

1.Determine the clock mounting location.

2.Using the template provided, mark the location where the clock is to be mounted, making sure the center is located over the data cable outlet.

3.Join the Ethernet Clock Mount (Inova p/n 714755) and the Ethernet Clock Cantilever Wall Mount (Inova p/n 714756) using a #2 Phillips screwdriver and a 3/8” (.952 cm) wrench. Make sure that the 2 washers are fitted between the Clock Mount and the Cantilever Wall Mount. Refer to the illustration below.

Figure 3 - Mounting Kits

4.Insert 10 to 12 inches (30 cm) of data cable through the center hole of the mounting unit.

All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be

trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 6

Image 11

Contents Inova OnTimeTM Digital Clock Inova OnTimeTM Digital Clock Table of Contents Recording Static IP Addresses or Host Names Maintenance Product WarrantyTables FiguresIntroduction to Inova OnTimeTM Digital Clocks Safety Instructions ONT4 Models ONT6 Models Technical SpecificationsTechnical Specifications Surface Mounting Unpacking and InstallationPendant Mounting Pendant Mounting Single or DoubleCantilever Mounting Cantilever Mounting Single or DoublePage Clock Configuration Methods Digital Clock ConfigurationConfiguration Method Description Reference With a clock configuration string. Clocks willConfiguration Planning Using Dhcp for Addressing and ConfigurationPage Option Value Creating a Dhcp Configuration StringConfiguration Setting Option NameExamples of Common Dhcp Configuration Strings Setting a Different Dhcp Option Number on a ClockVerifying the Dhcp Configuration Settings on a Clock Command DescriptionDhcp Configuration Example for Microsoft Server Accessing Telnet Command Line and Signing Telnet ConfigurationDisplay ? or help display Accessing Help CommandsSetting the Dhcp Address Assigning an IP AddressSpecifying a Time Server Setting the Static IP AddressSelecting the Time Server Selecting Time Zones Testing the Time Server SynchronizationConfiguring Colons On/Off Configuring Daylight Saving TimeConfiguring 12/24 Time Format Configuring AM/PM IndicatorTroubleshooting OnTime Digital Clock TroubleshootingRecording IP Addresses or Host Names Recording Static IP Addresses or Host NamesMaintenance Repair and Return Product WarrantyCantilever Glossary of TermsDisplay ? or help display Appendix a Digital Clock ConfigurationSolution ConditionArp Sntp -sNetstat Reboot Configuration CommandsAppendix B Sntp Basics Appendix C Configuring Dhcp Options for Microsoft Servers