Inova OnTimeTM owner manual Appendix a Digital Clock Configuration, Condition, Solution

Page 29

Inova OnTime Digital Clock Owner's Manual

Appendix A: Digital Clock Configuration

This section summarizes the configuration options available with the Digital Clock.

Condition

Get help for clock commands

Determine the IP Address of a Clock

Display the configuration settings for clock

View or change the Daylight Saving Time (DST) setting

Solution

?or help To see a list of all the telnet command options for which help is available.

To see help for a particular command option, type the command option help followed by ?. For example, to see help for the display option:

display ? or help display

If the IP Address of each clock has not been recorded during installation, it is suggested to follow this procedure.

1.Lift UP gently on the unit to free the keyholes at the rear of the clock from the mounting hardware.

2.Disconnect the network cable from the clock in question and count to five.

Replace the network cable and watch the face of the clock. It will display its IP address as it boots.

config Display all configuration parameters except those sent by the DHCP server. Use the DHCP config command to view these superseding options

No Daylight Saving Time - Type the command to disable DST: dst –nonePress the Enter key.

US and Canada - Type: dst -rule -1 8 2 2 1 1 10 2 Press the Enter key.

European - Type: dst -rule 1 -1 2 1 1 -1 9 1

Press the Enter key.

Other Locations – The support web site at www.buyinova.com contains a DST calculator which can compute the correct DST configurations string for you location. Obtain the correct string and enter it with the dst –rulecommand.

All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be

trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 24

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Inova OnTimeTM Digital Clock Inova OnTimeTM Digital Clock Table of Contents Recording Static IP Addresses or Host Names Maintenance Product WarrantyTables FiguresIntroduction to Inova OnTimeTM Digital Clocks Safety Instructions ONT4 Models ONT6 Models Technical SpecificationsTechnical Specifications Surface Mounting Unpacking and InstallationPendant Mounting Pendant Mounting Single or DoubleCantilever Mounting Cantilever Mounting Single or DoublePage Configuration Method Description Reference Digital Clock ConfigurationWith a clock configuration string. Clocks will Clock Configuration MethodsConfiguration Planning Using Dhcp for Addressing and ConfigurationPage Configuration Setting Creating a Dhcp Configuration StringOption Name Option ValueVerifying the Dhcp Configuration Settings on a Clock Setting a Different Dhcp Option Number on a ClockCommand Description Examples of Common Dhcp Configuration StringsDhcp Configuration Example for Microsoft Server Accessing Telnet Command Line and Signing Telnet ConfigurationSetting the Dhcp Address Accessing Help CommandsAssigning an IP Address Display ? or help displaySpecifying a Time Server Setting the Static IP AddressSelecting the Time Server Selecting Time Zones Testing the Time Server SynchronizationConfiguring 12/24 Time Format Configuring Daylight Saving TimeConfiguring AM/PM Indicator Configuring Colons On/OffTroubleshooting OnTime Digital Clock TroubleshootingRecording IP Addresses or Host Names Recording Static IP Addresses or Host NamesMaintenance Repair and Return Product WarrantyCantilever Glossary of TermsSolution Appendix a Digital Clock ConfigurationCondition Display ? or help displayArp Sntp -sNetstat Reboot Configuration CommandsAppendix B Sntp Basics Appendix C Configuring Dhcp Options for Microsoft Servers
Top Page Image Contents