Inova OnTimeTM owner manual Unpacking and Installation, Surface Mounting

Page 9

Inova OnTime Digital Clock Owner's Manual

Section 4: Unpacking and Installation

The OnTime Digital Clock arrives fully assembled in a single package. Inspect the clock and report any damage to Inova Solutions, Inc.

Once you have removed and inspected the clock, you have several mounting options to consider. The procedures for surface mounting, pendant mounting, and cantilever mounting are included on the following pages.

Surface Mounting

The following is a recommended procedure for surface mounting. No mounting kit is required.

1.Determine the clock mounting location.

2.Mark two points 10” (25.4 cm) apart, level, and centered on the data cable outlet.

3.Insert two flat-head fasteners suitable for the wall surface at the marked points and tighten.

4.Withdraw the fasteners until there is a 1/16” (.16cm) gap between the mounting surface and the back of the fastener head.

5.Insert the data cable into the jack located at the back of the OnTime Digital Clock.

6.Position the keyhole slots located on the rear of the clock over the fastener heads.

7.Pull the clock slightly downward until the unit is seated.

All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be

trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 4

Image 9

Contents Inova OnTimeTM Digital Clock Inova OnTimeTM Digital Clock Table of Contents Recording Static IP Addresses or Host Names Maintenance Product WarrantyTables FiguresIntroduction to Inova OnTimeTM Digital Clocks Safety Instructions Technical Specifications Technical SpecificationsONT4 Models ONT6 Models Surface Mounting Unpacking and InstallationPendant Mounting Pendant Mounting Single or DoubleCantilever Mounting Cantilever Mounting Single or DoublePage Configuration Method Description Reference Digital Clock ConfigurationWith a clock configuration string. Clocks will Clock Configuration MethodsConfiguration Planning Using Dhcp for Addressing and ConfigurationPage Configuration Setting Creating a Dhcp Configuration StringOption Name Option ValueVerifying the Dhcp Configuration Settings on a Clock Setting a Different Dhcp Option Number on a ClockCommand Description Examples of Common Dhcp Configuration StringsDhcp Configuration Example for Microsoft Server Accessing Telnet Command Line and Signing Telnet ConfigurationSetting the Dhcp Address Accessing Help CommandsAssigning an IP Address Display ? or help displaySpecifying a Time Server Setting the Static IP AddressSelecting the Time Server Selecting Time Zones Testing the Time Server SynchronizationConfiguring 12/24 Time Format Configuring Daylight Saving TimeConfiguring AM/PM Indicator Configuring Colons On/OffTroubleshooting OnTime Digital Clock TroubleshootingRecording IP Addresses or Host Names Recording Static IP Addresses or Host NamesMaintenance Repair and Return Product WarrantyCantilever Glossary of TermsSolution Appendix a Digital Clock ConfigurationCondition Display ? or help displayArp Sntp -sNetstat Reboot Configuration CommandsAppendix B Sntp Basics Appendix C Configuring Dhcp Options for Microsoft Servers