Inova OnTimeTM Accessing Help Commands, Assigning an IP Address, Display ? or help display

Page 20

Inova OnTime Digital Clock Owner's Manual

The clock’s password prompt appears:

iclock password:

5.Enter the clock’s password (the default is timely).

The clock’s telnet prompt appears:

iclock />

You are now ready to set configuration using the telnet commands.

Accessing Help Commands

For help with a specific telnet command, at the prompt, you have two options:

help or ? along with the command.

For example, to see help for the display option:

display ? or help display

Assigning an IP Address

There are two options for assigning an IP Address to each OnTime Digital Clock:

•DHCP Address [Factory Default]

•Static IP Address

Setting the DHCP Address

The factory default is DHCP. When connected to the network, the clock will request DHCP service. The letters DHCP may be displayed briefly on the screen. If the DHCP message remains in place, then DHCP service is not available.

All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be

trademarks of the companies with which they are associated. © 2007 Inova Solutions. All rights reserved. 6.12.2007 page 15

Image 20

Contents Inova OnTimeTM Digital Clock Inova OnTimeTM Digital Clock Table of Contents Maintenance Product Warranty Recording Static IP Addresses or Host NamesFigures TablesIntroduction to Inova OnTimeTM Digital Clocks Safety Instructions ONT4 Models ONT6 Models Technical SpecificationsTechnical Specifications Unpacking and Installation Surface MountingPendant Mounting Single or Double Pendant MountingCantilever Mounting Single or Double Cantilever MountingPage Digital Clock Configuration Configuration Method Description ReferenceWith a clock configuration string. Clocks will Clock Configuration MethodsUsing Dhcp for Addressing and Configuration Configuration PlanningPage Creating a Dhcp Configuration String Configuration SettingOption Name Option ValueSetting a Different Dhcp Option Number on a Clock Verifying the Dhcp Configuration Settings on a ClockCommand Description Examples of Common Dhcp Configuration StringsDhcp Configuration Example for Microsoft Server Telnet Configuration Accessing Telnet Command Line and SigningAccessing Help Commands Setting the Dhcp AddressAssigning an IP Address Display ? or help displaySetting the Static IP Address Specifying a Time ServerTesting the Time Server Synchronization Selecting the Time Server Selecting Time ZonesConfiguring Daylight Saving Time Configuring 12/24 Time FormatConfiguring AM/PM Indicator Configuring Colons On/OffTroubleshooting Troubleshooting OnTime Digital ClockRecording Static IP Addresses or Host Names Recording IP Addresses or Host NamesMaintenance Product Warranty Repair and ReturnGlossary of Terms CantileverAppendix a Digital Clock Configuration SolutionCondition Display ? or help displaySntp -s ArpReboot Configuration Commands NetstatAppendix B Sntp Basics Appendix C Configuring Dhcp Options for Microsoft Servers