Chapter 2. Installing the Memory Key in Windows 2000 or Windows XP
Before you install the IBM USB 2.0 Memory Key, make sure that you have the following software and hardware:
vOne of the following operating systems:
–Windows 2000
–Windows XP
vAn available USB connector
vPentium II 266 MHz
v1.7 MB free disk space
vAccess to the main drive (usually drive C)
The following items are necessary if you will be using the Memory Key as a bootable device. See Chapter 6, “Using IBM Memory Key Boot Utility,” on page
vBIOS that supports bootable USB storage devices. If you are uncertain about whether the BIOS supports bootable USB devices, contact your computer manufacturer. An update might be available.
vThe BIOS documentation that came with your computer or BIOS update, if applicable.
Windows 2000 and Windows XP have
© Copyright IBM Corp. 2004 |