Cisco Systems 9124E manual Setting the IP address, Checking LEDs, Power-on LEDs, Indicators

Page 21

Checking LEDs

See Figure 6 to locate power-on LEDs.

1
EXT 1	EXT 2	EXT 3	EXT 4
!
:			181738
			181738
2

Figure 6 Verifying power-on LEDs

Verify that the LEDs match the indicators described in Table 7.

Table 7 Power-on LEDs

Item	Description	Indicators

1	UID LED - used to help user locate a specific	Off
	module in the BladeSystem for replacement,
	etc.

2	Health ID LED	Steady green light

Setting the IP address

Obtain the following items to set the IP address via a serial connection:

•Computer with a terminal application (such as HyperTerminal in a Windows environment or TERM in a UNIX environment

•Null modem serial cable

Set the IP address:

1.Verify that the enclosure is powered on.

2.Identify the active OA in the BladeSystem.

3.Connect a Null modem serial cable from your computer to the serial port of the active OA.

4.Configure the terminal application as follows:

•In a Windows environment:

•Baud rate—9600 bits per second

•8 data bits

•None (No parity)

•1 stop bit

•No flow control

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 21

Image 21

Contents Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Legal and notice information Contents Regulatory compliance and safety Managing the SwitchSwitch technical specifications Electrostatic dischargeGlossary Contents Intended audience About this guideRelated documentation Contacting HP Technical SupportDocument conventions Convention Element Document conventions and symbolsOther HP web sites Subscription serviceAbout This Guide Overview Switch featuresComponent identification Port side of the Switch Switch redundancyInternal ports summary PortChannel Switch licensingOptional hardware Optional hardware kitsOverview Shipping carton contents SetupInstalling the Switch Installation and safety considerationsInstalling multiple switches Electrical considerationsScale 2/3 = OA power verification Power-on LEDs Setting the IP addressIndicators Checking LEDsOA connect interconnect Resetting the IP AddressConfiguring the Switch Items Required for ConfigurationConnecting to the Command Line Interface Verifying Installed Licenses Setting the date and timeModifying the FC domain ID optional On Demand PortsDisabling and enabling a port Recovering the Admin Password Verifying the configurationBacking up the configuration Switchboot# dir bootflash Set Up Management features Managing the SwitchMaintaining the Switch Installing dust covers in empty portsReplacing an SFP transceiver Installing an SFP SFP components Replacing the SwitchPowering on and off LED indicators Front panel LED indicators during normal operationInterpreting LED activity Post and boot specifications LED patternsPort link status LED patterns LED color Interpreting Post results BootManaging the Switch Regulatory compliance Regulatory compliance and safetyModifications CablesLaser device Laser safety warningRegulatory compliance identification numbers Certification and classification informationCanadian notice avis Canadien International notices and statementsEuropean Union notice Class a equipmentBsmi notice Japanese notice Korean notices Safety Battery replacement noticeTaiwan battery recycling notice Waste Electrical and Electronic Equipment directive Japanese power cord statementEnglish notice Dutch noticeFinnish notice Czechoslovakian notice Estonian noticeGerman notice French noticeGreek notice Hungarian notice Latvian notice Italian noticePortuguese notice Lithuanian notice Polish noticeSlovakian notice Slovenian notice Spanish notice Swedish notice Regulatory compliance and safety How to prevent electrostatic discharge Electrostatic dischargeGrounding methods Electrostatic discharge Switch technical specifications General specificationsGeneral specifications Specification Switch physical dimensions Dimension Weight and physical dimensionsSupported SFPs Environmental requirementsSupported HBAs Environmental requirements ConditionSwitch technical specifications Glossary Enabled zone Directory serviceError FCS switchFill word Fibre ChannelFLPort FrameLPort Link servicesLatency LinkNode SwitchNon-participating ModeSingle mode Service rateSwitch port Request rateTransmission TopologyCharacter Trap SnmpGlossary Index Index Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Index