Cisco Systems 9124E manual Environmental requirements, Supported SFPs, Supported HBAs

Page 55

Environmental requirements

To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges specified in Table 16 list the acceptable environment for both operating and non-operating conditions.

Table 15 Environmental requirements

Condition	Acceptable range during operation	Acceptable range during non-operation

Ambient temperature	104°F/40 °C at sea level, derated	-40°C to 70°C with maximum rate
	1 C per 1000 ft above sea level	of change of 20 C /hr

Humidity	5% to 90% relative humidity,	50% to 80% relative humidity,
	non-condensing	non-condensing

Altitude	0 to 10,000 ft (3 km) above sea	0 to 40,000 ft (12 km) above sea
	level	level

Shock	40 G, 2mS duration	140 G, 2mS duration

Vibration	0.5 G, 10 to 500 Hz	2.0 G, 5 to 500 Hz

Airflow	47 cubic ft per minute	None required

Supported SFPs

Do not use unsupported SFPs; they can affect switch operability. They may not fit correctlyand may void your warranty. See Optional hardware kits for a list of supported SFPs.

For a complete list of supported devices, refer to the latest version of the HP StorageWorks SAN design reference guide:

http://h18000.www1.hp.com/products/storageworks/san/documentation.html

Supported HBAs

For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the latest version of the HP StorageWorks SAN design reference guide:

http://h18000.www1.hp.com/products/storageworks/san/documentation.htm

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 55

Image 55

Contents Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Legal and notice information Contents Electrostatic discharge Managing the SwitchRegulatory compliance and safety Switch technical specificationsGlossary Contents Contacting HP Technical Support About this guideIntended audience Related documentationDocument conventions Convention Element Document conventions and symbolsOther HP web sites Subscription serviceAbout This Guide Overview Switch featuresComponent identification Switch redundancy Port side of the SwitchInternal ports summary PortChannel Switch licensingOptional hardware Optional hardware kitsOverview Shipping carton contents SetupElectrical considerations Installation and safety considerationsInstalling the Switch Installing multiple switchesScale 2/3 = OA power verification Checking LEDs Setting the IP addressPower-on LEDs IndicatorsOA connect interconnect Resetting the IP AddressItems Required for Configuration Configuring the SwitchConnecting to the Command Line Interface Verifying Installed Licenses Setting the date and timeOn Demand Ports Modifying the FC domain ID optionalDisabling and enabling a port Verifying the configuration Recovering the Admin PasswordBacking up the configuration Switchboot# dir bootflash Set Up Management features Managing the SwitchInstalling dust covers in empty ports Maintaining the SwitchReplacing an SFP transceiver Installing an SFP SFP components Replacing the SwitchPowering on and off Front panel LED indicators during normal operation LED indicatorsInterpreting LED activity LED patterns Post and boot specificationsPort link status LED patterns LED color Interpreting Post results BootManaging the Switch Cables Regulatory compliance and safetyRegulatory compliance ModificationsCertification and classification information Laser safety warningLaser device Regulatory compliance identification numbersClass a equipment International notices and statementsCanadian notice avis Canadien European Union noticeBsmi notice Japanese notice Korean notices Battery replacement notice SafetyTaiwan battery recycling notice Dutch notice Japanese power cord statementWaste Electrical and Electronic Equipment directive English noticeFinnish notice Czechoslovakian notice Estonian noticeGerman notice French noticeGreek notice Hungarian notice Latvian notice Italian noticePortuguese notice Lithuanian notice Polish noticeSlovakian notice Slovenian notice Spanish notice Swedish notice Regulatory compliance and safety Electrostatic discharge How to prevent electrostatic dischargeGrounding methods Electrostatic discharge General specifications Switch technical specificationsGeneral specifications Specification Switch physical dimensions Dimension Weight and physical dimensionsEnvironmental requirements Condition Environmental requirementsSupported SFPs Supported HBAsSwitch technical specifications Glossary FCS switch Directory serviceEnabled zone ErrorFrame Fibre ChannelFill word FLPortLink Link servicesLPort LatencyMode SwitchNode Non-participatingRequest rate Service rateSingle mode Switch portTrap Snmp TopologyTransmission CharacterGlossary Index Index Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Index