Cisco Systems 9124E manual OA power verification

Page 20

4	EXT 5

EXT 5
EXT 8	EXT 7
	EXT 7
	EXT 8

Cisco MDS 9124e

181737

Figure 5 Installing the Cisco MDS 9124e Fabric Switch into an interconnect bay

6.Press the installation handle into the latch to lock the switch in place.

OA power verification

As defined earlier, the HP BladeSystem Onboard Administrator (OA) is the enclosure management tool that manages the devices contained within the enclosure. The OA provides a single point from which to perform basic management tasks on switches or server blades installed in the enclosure.

IMPORTANT:

HP recommends reading the HP BladeSystem c7000 Enclosure user guide and the HP BladeSystem Onboard Administrator user guide. Reading these guides in sequence will promote an overall understanding of the enclosure system.

Once the switch is installed in the interconnect bay, the OA verifies that the switch type matches the mezzanine cards present on the servers. If there is no mismatch, the OA powers up the switch. If the switch does not power up, check the enclosure and switch status via the OA web interface. Refer to the HP BladeSystem Onboard Administrator user guide.

20 Set Up

Image 20

Contents Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Legal and notice information Contents Managing the Switch Regulatory compliance and safetySwitch technical specifications Electrostatic dischargeGlossary Contents About this guide Intended audienceRelated documentation Contacting HP Technical SupportDocument conventions and symbols Document conventions Convention ElementSubscription service Other HP web sitesAbout This Guide Switch features OverviewComponent identification Internal ports summary Port side of the SwitchSwitch redundancy Switch licensing PortChannelOptional hardware kits Optional hardwareOverview Setup Shipping carton contentsInstallation and safety considerations Installing the SwitchInstalling multiple switches Electrical considerationsScale 2/3 = OA power verification Setting the IP address Power-on LEDsIndicators Checking LEDsResetting the IP Address OA connect interconnectConnecting to the Command Line Interface Configuring the SwitchItems Required for Configuration Setting the date and time Verifying Installed LicensesDisabling and enabling a port Modifying the FC domain ID optionalOn Demand Ports Backing up the configuration Recovering the Admin PasswordVerifying the configuration Switchboot# dir bootflash Set Up Managing the Switch Management featuresReplacing an SFP transceiver Maintaining the SwitchInstalling dust covers in empty ports Replacing the Switch Installing an SFP SFP componentsPowering on and off Interpreting LED activity LED indicatorsFront panel LED indicators during normal operation Port link status LED patterns LED color Post and boot specificationsLED patterns Boot Interpreting Post resultsManaging the Switch Regulatory compliance and safety Regulatory complianceModifications CablesLaser safety warning Laser deviceRegulatory compliance identification numbers Certification and classification informationInternational notices and statements Canadian notice avis CanadienEuropean Union notice Class a equipmentBsmi notice Japanese notice Korean notices Taiwan battery recycling notice SafetyBattery replacement notice Japanese power cord statement Waste Electrical and Electronic Equipment directiveEnglish notice Dutch noticeCzechoslovakian notice Estonian notice Finnish noticeFrench notice German noticeGreek notice Hungarian notice Italian notice Latvian noticeLithuanian notice Polish notice Portuguese noticeSlovakian notice Slovenian notice Spanish notice Swedish notice Regulatory compliance and safety Grounding methods How to prevent electrostatic dischargeElectrostatic discharge Electrostatic discharge General specifications Specification Switch technical specificationsGeneral specifications Weight and physical dimensions Switch physical dimensions DimensionEnvironmental requirements Supported SFPsSupported HBAs Environmental requirements ConditionSwitch technical specifications Glossary Directory service Enabled zoneError FCS switchFibre Channel Fill wordFLPort FrameLink services LPortLatency LinkSwitch NodeNon-participating ModeService rate Single modeSwitch port Request rateTopology TransmissionCharacter Trap SnmpGlossary Index Index Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem Index