99
Run a Self-Test on a Power Supply
1.Show the ID of the power supply that you want to diagnose, if you do not already know the number.
a. Enter the show
Example
SFS-270# show power-supply
=====================================================================
=====================================================================
ps type
1 | AC | up | up | n/a | 48 |
2 | AC | up | up | 15 | 47 |
2.Enter the diag
Example
SFS-270(config)# diag power-supply 2
3.Start the test.
Example
4.Use the show diag fan command to show the progress of the test.
Example
SFS-270# show diag power-supply
================================================================================
Diagnostic Tests For Power Supply
================================================================================
test :
action : start
result : success
em