Cisco Systems DGS-1224T manual Definitions of the Monitor List functions and terms, View trap

Definitions of the Monitor List functions and terms:

S:Shows the system symbol of the Web-Smart device, represents the device system is inactive.

IP Address: Shows the current IP address of the device.

MAC Address: Shows the device MAC Address.

Protocol version: Shows the version of the Utility protocol.

Product Name: Shows the device product name.

System Name: Shows the appointed device system name.

DHCP: uses a client/server model to obtain lease of an IP address from a DHCP server as part of the network boot process.

Location: Shows where the device is located.

Trap IP: Shows the IP where the Trap to be sent.

Subnet Mask: Shows the Subnet Mask set of the device.

Gateway: Shows the Gateway set of the device.

View Trap: The Trap function works to receive the events configured in the Web-Smart Switch from the Monitor List.

There is a light indicator following the “View Trap” button. When the light indicates in green, no new traps are available. When red, a new trap indicates a new trap is available. (Figure 8)

Figure 8 – View trap

When the “View Trap” button is clicked, a Trap Information window will pop up, showing the trap information, such as Symbol, Time, Device IP and the Event occurred. (Figure 9)

21