Cisco Systems DGS-1224T manual System System Setting, System Trap Setting

Page 34

System > System Setting

The System Setting includes IP Information and System information. By default DHCP is disabled. If DHCP is disabled, the IP Address, Subnet Mask and Gateway can be manually configured. By entering a System Name and System Location, the device can more easily be recognized through the SmartConsole Utility and in other Web-Smart devices on the LAN. The Login Timeout controls the idle time-out for security purposes, when there is no action in the Web-based Utility. When the Login Timeout expires, the Web-based Utility requires a re- login before using the Utility again.

Figure 23 – System > System Setting

System > Trap Setting

ATrap Setting allows the Web-Smart Switch to monitor Trap information through the Web-based Utility of an IP address on the LAN. By default, Trap Setting is Disabled. When the Trap Setting is

30

Image 34

Contents LinkDGS-1224T Building Networks for PeopleTable of Contents Page Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionFast Ethernet Technology Switching Technology Ieee 802.1Q VlanFeatures IEEE802.1Q VlanTechnical Specifications Flash Memory Ieee 802.3 complianceEmission EMI and Safety Certifications Temperature Storage TemperaturePower consumption Physical & EnvironmentInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power LED Indicator Front PanelRear panel of the Switch Rear PanelPower and System LEDs Understanding LED IndicatorsBlinking Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarPage Discovery List Definitions of the Discovery List featuresMonitor List Definitions of the Monitor List functions and terms View trapDevice Setting Trap informationThis space has been intentionally reserved for notes Firmware Upgrade Login Web-based UtilityLog in screen Tool Menu Tool MenuTool Menu Configure Backup and Restore Setup Menu Tool Menu System RebootSystem System Setting System Trap SettingSystem Trap Setting System Port Setting System Port SettingSystem Snmp Setting System Snmp Setting System Password Access Control System Password Access ControlConfiguration Jumbo Frame Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Example VIDs Configuration Trunking Configuration Igmp SnoopingConfiguration Igmp Snooping Configuration Page Configuration Igmp Router port Settings Configuration Igmp Multicast Entry Table Configuration 802.1D Spanning Tree Configuration Spanning TreePage Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority Security Safeguard EngineSecurity Safeguard Engine Security Broadcast Storm ControlSecurity 802.1X Setting Security Broadcast Storm ControlQoS 802.1X Setting Page Security Mac Address Table Static MAC Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Security Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics