Cisco Systems DGS-1224T manual QoS 802.1X Setting

Page 54

Figure 42 – QoS > 802.1X Setting

By default, 802.1X is Disabled. To use EAP for security, select Enabled and set the 802.1X Global Settings for the Radius Server and applicable authentication information.

Authentication Port: sets primary port for security monitoring. Default is 1812.

Key: Masked password matching the Radius Server Key.

Confirm Key: Enter the Key a second time for confirmation.

TxPeriod: Sets the number of seconds that the switch waits for a response to an EAP-request/identity frame from the client before retransmitting the request. Default is 24 seconds.

ReAuthEnabled: This Enables or Disables the periodic ReAuthentication control. When the 802.1X function is Enabled, the ReAuthEnabled function is by default also Enabled.

50

Image 54

Contents LinkDGS-1224T Building Networks for PeopleTable of Contents Page Page Purpose Terms/UsageGigabit Ethernet Technology IntroductionFast Ethernet Technology Switching Technology Ieee 802.1Q VlanFeatures IEEE802.1Q VlanTechnical Specifications Flash Memory Ieee 802.3 complianceEmission EMI and Safety Certifications Temperature Storage TemperaturePower consumption Physical & EnvironmentInstallation UnpackingRack Mounting Attach the adhesive rubber pads to the bottomConnecting Network Cable Attach the mounting brackets to the SwitchAC Power LED Indicator Front PanelRear panel of the Switch Rear PanelPower and System LEDs Understanding LED IndicatorsBlinking Installing the SmartConsole Utility Supported web browsersSmartConsole Utility Features Menu ToolbarPage Definitions of the Discovery List features Discovery ListMonitor List Definitions of the Monitor List functions and terms View trapDevice Setting Trap informationThis space has been intentionally reserved for notes Firmware Upgrade Login Web-based UtilityLog in screen Tool Menu Tool MenuTool Menu Configure Backup and Restore Setup Menu Tool Menu System RebootSystem System Setting System Trap SettingSystem Trap Setting System Port Setting System Port SettingSystem Snmp Setting System Snmp Setting System Password Access Control System Password Access ControlConfiguration Jumbo Frame Configuration 802.1Q VlanConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Example VIDs Configuration Trunking Configuration Igmp SnoopingConfiguration Igmp Snooping Configuration Page Configuration Igmp Router port Settings Configuration Igmp Multicast Entry Table Configuration 802.1D Spanning Tree Configuration Spanning TreePage Configuration Port Mirroring Configuration Port MirroringQoS 802.1p Default Priority Security Safeguard EngineSecurity Safeguard Engine Security Broadcast Storm ControlSecurity 802.1X Setting Security Broadcast Storm ControlQoS 802.1X Setting Page Security Mac Address Table Static MAC Security Static Mac AddressSecurity Mac Address Table Dynamic Forwarding Table Security Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics