Cisco Systems DGS-1224T manual Security Mac Address Table Static MAC, Security Static Mac Address

Security > Mac Address Table > Static MAC

This page provides two distinct features. The top table provides the ability to turn off auto learning Mac address if a port isn't connected to an uplink Switch (i.e. DHCP Server). By default, this feature is OFF (disabled).

Figure 43 – Security > Static Mac Address

To initiate the removal of auto-learning for any of the uplink ports, press On to enable this feature, and select the port(s) for auto learning to be disabled.

The Static Mac Address Setting table displays the static Mac addresses connected, as well as the VID. Press Delete to remove a device. To add a new Mac address assignment, press Add Mac, then select the assigned Port number, enter both the Mac Address and VID and press Apply.

52