Cisco Systems DGS-1224T manual

Page 23

•Exit: To exit the SmartConsole Utility.

View includes: View log and Clear Log functions, which provide trap setting list operations.

•View Log: To show the event of the SmartConsole Utility and the device.

•Clear Log: To clear all log entries.

Option includes: Refresh Time and Group Timer functions.

•Refresh time refreshes the monitoring time of the device. Choices include 15 secs, 30 secs, 1 min, 2 min and 5 min for selecting the monitoring time intervals.

•Group Timer establishes the intervals (in seconds) that the Web-Smart Switch will be discovered in the SmartConsole Utility Discovery List.

NOTE: If the Group Timer is set to 0, IGMP snooping must be disabled or else the Web-Smart Switch will not be discovered.

Image 23

Contents Building Networks for People LinkDGS-1224TTable of Contents Page Page Terms/Usage PurposeIntroduction Gigabit Ethernet TechnologyFast Ethernet Technology Ieee 802.1Q Vlan Switching TechnologyIEEE802.1Q Vlan FeaturesTechnical Specifications Ieee 802.3 compliance Flash MemoryPhysical & Environment Temperature Storage TemperaturePower consumption Emission EMI and Safety CertificationsUnpacking InstallationAttach the adhesive rubber pads to the bottom Rack MountingAttach the mounting brackets to the Switch Connecting Network CableAC Power Front Panel LED IndicatorRear Panel Rear panel of the SwitchUnderstanding LED Indicators Power and System LEDsBlinking Supported web browsers Installing the SmartConsole UtilityMenu Toolbar SmartConsole Utility FeaturesPage Monitor List Definitions of the Discovery List featuresDiscovery List View trap Definitions of the Monitor List functions and termsTrap information Device SettingThis space has been intentionally reserved for notes Firmware Upgrade Web-based Utility LoginLog in screen Tool Menu Tool MenuTool Menu Configure Backup and Restore Tool Menu System Reboot Setup MenuSystem Trap Setting System System SettingSystem Trap Setting System Port Setting System Port SettingSystem Snmp Setting System Snmp Setting System Password Access Control System Password Access ControlConfiguration 802.1Q Vlan Configuration Jumbo FrameConfiguration 802.1Q Vlan Default Setting Configuration 802.1Q Vlan Example VIDs Configuration Igmp Snooping Configuration TrunkingConfiguration Igmp Snooping Configuration Page Configuration Igmp Router port Settings Configuration Igmp Multicast Entry Table Configuration Spanning Tree Configuration 802.1D Spanning TreePage Configuration Port Mirroring Configuration Port MirroringSecurity Safeguard Engine QoS 802.1p Default PrioritySecurity Broadcast Storm Control Security Safeguard EngineSecurity Broadcast Storm Control Security 802.1X SettingQoS 802.1X Setting Page Security Static Mac Address Security Mac Address Table Static MACSecurity Dynamic Forwarding Table Security Mac Address Table Dynamic Forwarding TableMonitoring Statistics Monitoring StatisticsMonitoring Port Statistics