
Chapter 1 Product Overview
Front Panel Description
Use only Cisco SFP modules on your switch. Each SFP module has an internal serial electrically erasable programmable
For information about Cisco SFP modules, see the documentation at this URL:
http://www.cisco.com/en/US/products/hw/modules/ps5455/tsd_products_support_series_home.html
SFP Module Patch Cable
The Cisco ME switch supports the SFP module patch cable, a
Figure 1-7 SFP Module Patch Cable
126809
See the “Inserting and Removing the SFP Module Patch Cable” section on page
On the Cisco
You can order the SFP module patch cable (part number
LEDs
You can use the switch System and port LEDs to monitor switch activity and performance. The LEDs are described in these sections:
•System LED, page
•Power Supply LEDs (Only Cisco ME
•Port LEDs, page
•
System LED
These illustrations show the location of the System LED:
•Figure 1-8 on page 1-9, Cisco ME 3400-24TS and Cisco ME 3400-24FS Switches
•Figure 1-9 on page 1-9, Cisco ME 3400-12CS Switch
•Figure 1-10 on page 1-9, Cisco ME 3400G-2CS Switch
Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide
|
| |
|