Cisco Systems Cisco ME 3400 Dual-Purpose Ports, Figure A-2 Fiber-Optic SFP Module LC Connector

Appendix A Connector and Cable Specifications

Connector Specifications

SFP Module Ports

The Cisco ME switch uses SFP modules for fiber-optic and copper uplinks. See the Cisco ME switch release notes for a list of supported SFP modules.

Figure A-2 Fiber-Optic SFP Module LC Connector

58476

Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051

Dual-Purpose Ports

The Cisco ME 3400G-12CS 10/100/1000 Ethernet ports on the dual-purpose ports use standard RJ-45 connectors. Figure A-3shows the pinouts.

Figure A-3 10/100/1000 Port Pinouts

Pin Label

1TP0+

2TP0-

3TP1+

4TP2+

5TP2-

6TP1-

7TP3+

8TP3-

1 2 3 4 5 6 7 8

60915

Console Port

The console port uses an 8-pin RJ-45 connector, which is described in Table A-2and Table A-3. If you did not order a console cable with your switch, you need to provide an RJ-45-to-DB-9 adapter cable to connect the console port of the switch to a console PC. You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see Table A-2and Table A-3.

Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide

OL-7677-04 A-3