Cisco Systems Cisco ME 3400 manual Figure C-11 Inserting Wires in the Terminal Block Plug

Appendix C Connecting to DC Power

Wiring the DC-Input Power Source

Figure C-11 Inserting Wires in the Terminal Block Plug

1

2

3

4

132849

1	Return (positive) Feed A	3	Return (positive) Feed B
2	Supply (negative) Feed A	4	Supply (negative) Feed B

Step 6 Use a ratcheting torque screwdriver to torque the terminal block captive screw (above the installed wire lead) to 4.5 lbf-in. (72 ozf-in.). (See Figure C-12.)

Caution Do not overtorque the terminal-block captive screws. The recommended maximum torque is 4.5 lbf-in.

Figure C-12 Torquing the Terminal-Block Captive Screws

Torque to 4.5 lbf-in. (72 ozf-in.)

60533

Step 7 Repeat Steps 4 and 5 for the remaining three DC-input power source wires. Figure C-13shows the completed wiring of a terminal block plug.

Cisco ME 3400 Ethernet Access Switch Hardware Installation Guide

C-10 OL-7677-04