Cisco Systems SLM2008RF manual Click Port Port Settings

Page 24

Advanced Configuration	5
Advanced Configuration
Port

The Port > Port Settings window displays the current port settings of the switch.

To configure port settings, follow these steps:

STEP 1 Click Port > Port Settings.

STEP 2 Configure the port settings.

•Port—Displays the port number.

•Link Status—Displays the link status of the port.

•Mode—The current speed and duplex mode settings are displayed here. Auto Speed is enabled by default to allow the switch to autonegotiate the speed and duplex settings. The following capabilities are supported and available from the Mode drop-down menu:

-Auto Speed—This option enables autonegotiation. When autonegotiation is enabled, you do not need to specify the capabilities to be advertised.

-10 Half—Supports 10 Mbps half-duplex operation.

-10 Full—Supports 10 Mbps full-duplex operation.

-100 Half—Supports 100 Mbps half-duplex operation.

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

19

Image 24

Contents Administration Guide OL-19923-01 Introduction Getting to Know the Cisco SLM2008 Switch Connecting the Cisco SLM2008 SwitchSetting Up the Cisco SLM2008 Switch Advanced ConfigurationVlan Appendix a Specifications Appendix B Where to Go From Here Introduction Front Panel Front Panel, Back Panel, Side Panels,Getting to Know the Cisco SLM2008 Switch Back PanelSide Panels Side Panels Placement Options Desktop OptionConnecting the Cisco SLM2008 Switch Wall-Mount OptionSuggested Mounting Hardware Wall Mounting TemplateConnecting the Cisco SLM2008 Switch to the Network Connecting the Cisco SLM2008 Switch Setting Up the Cisco SLM2008 Switch Launching the Web-Based Configuration UtilitySetting Up the Cisco SLM2008 Switch Login WindowNavigating the Utility System PortSecurity QoS StatisticsAdmin MulticastSetup Using the Help SystemAdvanced Configuration Example with Help Example with Help ExpandedConfiguring System Settings Click System System SettingsSystem Click Save Configuring Port Settings PortClick Port Port Settings Configuring Static Link Aggregation Configuring Lacp Settings Click Port Static Link AggregationClick Port Lacp Settings Displaying Lacp Status Click Port Lacp StatusConfiguring Vlan Settings Configuring Vlan Settings, Configuring Vlan Port Settings,Configuring Vlan Port Settings Click Vlan Vlan SettingsClick Vlan Vlan Port Settings Configuring 802.1X Settings SecurityAdvanced Configuration Click Security 802.1X Settings Configuring 802.1X Parameter Click Security 802.1X Parameter Configuring Static MAC Address Click Security Static MAC AddressConfiguring Management Access List Click Security Management Access ListConfiguring Storm Control Click Security Storm ControlConfiguring QoS Settings QoSClick QoS QoS Settings WRR Queue Mode QoS Mode Priority Diagram802.1p QoS Mode Default 802.1p Settings 802.1p Value Priority LevelPort-Based QoS Mode Dscp Settings Dscp Value Priority All othersConfiguring STP Settings Configuring STP Settings, Displaying STP Status,Click STP STP Settings Advanced Configuration Displaying STP Status Click STP STP StatusSTP Bridge Overview Statistics STP Port StatusDisplaying Statistics Overview, Displaying Igmp Status, Displaying Statistics Overview Click Statistics Statistics OverviewDisplaying Igmp Status Click Statistics Igmp StatusConfiguring Igmp Settings MulticastClick Multicast Igmp Settings Admin Configuring Ping Click Admin PingConfiguring Port Mirror Click Admin Port MirrorRestoring Factory Default Click Admin Factory Default Click Restore DefaultRebooting the Switch Click Admin RebootSaving Configuration Settings Click Admin Save ConfigurationClick Admin Firmware Upgrade Upgrading the FirmwareAdvanced Configuration Specifications PoEPerformance LayerManagement Other ManagementSecurity AvailabilityStandards EnvironmentalProduct Resources SupportProduct Documentation Cisco Small BusinessWhere to Go From Here