Cisco Systems SLM2008RF manual Click Port Lacp Settings

Page 27

Advanced Configuration

5

 

Port

 

 

 

 

 

To avoid creating a loop in the network, be sure you enable LACP before connecting the ports, and also disconnect the ports before disabling LACP.

NOTE LAG port members will have to be configured with the same speed and duplex mode. A user must ensure the LAG member’s ports have the same speed and duplex settings before activating an LACP group.

The Port > LACP Settings window displays the current LACP settings.

To configure the LACP settings, follow these steps:

STEP 1 Click Port > LACP Settings.

STEP 2 Configure the LACP settings.

Port—Displays the port number.

Enable LACP—When the check box is checked, LACP is enabled.

Admin Key—A channel will only be formed between ports having the same admin key. This only applies to ports located on the same switch. The default setting is auto.

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide

22

Image 27
Contents Administration Guide OL-19923-01 Advanced Configuration Introduction Getting to Know the Cisco SLM2008 SwitchConnecting the Cisco SLM2008 Switch Setting Up the Cisco SLM2008 SwitchVlan Appendix a Specifications Appendix B Where to Go From Here Introduction Front Panel, Back Panel, Side Panels, Front PanelGetting to Know the Cisco SLM2008 Switch Back PanelSide Panels Side Panels Desktop Option Placement OptionsWall Mounting Template Connecting the Cisco SLM2008 SwitchWall-Mount Option Suggested Mounting HardwareConnecting the Cisco SLM2008 Switch to the Network Connecting the Cisco SLM2008 Switch Launching the Web-Based Configuration Utility Setting Up the Cisco SLM2008 SwitchSetting Up the Cisco SLM2008 Switch Login WindowNavigating the Utility System PortSecurity Statistics QoSMulticast AdminUsing the Help System SetupExample with Help Example with Help Expanded Advanced ConfigurationConfiguring System Settings Click System System SettingsSystem Click Save Port Configuring Port SettingsClick Port Port Settings Configuring Static Link Aggregation Click Port Static Link Aggregation Configuring Lacp SettingsClick Port Lacp Settings Click Port Lacp Status Displaying Lacp StatusConfiguring Vlan Settings, Configuring Vlan Port Settings, Configuring Vlan SettingsClick Vlan Vlan Settings Configuring Vlan Port SettingsClick Vlan Vlan Port Settings Security Configuring 802.1X SettingsAdvanced Configuration Click Security 802.1X Settings Configuring 802.1X Parameter Click Security 802.1X Parameter Click Security Static MAC Address Configuring Static MAC AddressClick Security Management Access List Configuring Management Access ListClick Security Storm Control Configuring Storm ControlQoS Configuring QoS SettingsClick QoS QoS Settings QoS Mode Priority Diagram WRR Queue ModeDefault 802.1p Settings 802.1p Value Priority Level 802.1p QoS ModePort-Based QoS Mode All others Dscp Settings Dscp Value PriorityConfiguring STP Settings Configuring STP Settings, Displaying STP Status,Click STP STP Settings Advanced Configuration Displaying STP Status Click STP STP StatusSTP Bridge Overview Statistics STP Port StatusDisplaying Statistics Overview, Displaying Igmp Status, Click Statistics Statistics Overview Displaying Statistics OverviewClick Statistics Igmp Status Displaying Igmp StatusMulticast Configuring Igmp SettingsClick Multicast Igmp Settings Admin Click Admin Ping Configuring PingClick Admin Port Mirror Configuring Port MirrorClick Admin Factory Default Click Restore Default Restoring Factory DefaultClick Admin Reboot Rebooting the SwitchClick Admin Save Configuration Saving Configuration SettingsUpgrading the Firmware Click Admin Firmware UpgradeAdvanced Configuration Layer SpecificationsPoE PerformanceAvailability ManagementOther Management SecurityEnvironmental StandardsCisco Small Business Product ResourcesSupport Product DocumentationWhere to Go From Here