Cisco Systems SLM2008RF Configuring Management Access List, Click Security Management Access List

Advanced Configuration	5
Security

STEP 3 Click Save.

Configuring Management Access List

The Security > Management Access List window specifies which Source IP addresses can manage the device.

To configure the management access list, follow these steps:

STEP 1 Click Security > Management Access List.

STEP 2 Enter the following information:

•Enable Management Access List—Check the check box to enable IP Access List.

•Management IP address 1—Enter the IP address of a device that you wish to allow manage the switch.

•Management IP address 2—Enter the IP address of a second device that you wish to allow manage the switch.

•Management IP address 3—Enter the IP address of a third device that you wish to allow manage the switch.

Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 33