Cisco Systems OL-19806-03 manual Configuration Guidelines

Page 18

Chapter 1 Managing Single Entities

Configuration Guidelines

Configuration Guidelines

By default, EnergyWise is disabled on the switch.

If you enter the no energywise level command, the switch does not immediately change the power level to the default. The power level changes when the switch restarts or when you enter the energywise level level command.

For a switch with PoE ports, such as a PoE-capable switch:

•When you add the switch to a domain, EnergyWise is enabled on the switch and all the PoE switch ports.

•Use the energywise level 0 interface configuration command to power off a PoE port.

•You cannot use the energywise level 0 global configuration command to power off the switch.

If a port is in the error-disabled state:

•It appears as an EnergyWise entity in the show command output and in the collect query results. The query results show that the port uses 0 W.

•It does not respond to a set query.

For recurring events:

•Specify time in the 24-hour format. For example, to set 0634

–As a specific time, enter the energywise level level recurrence importance importance at 34 6 * * * interface configuration command.

–In a time range, enter the absolute start 06:34 * * 2009 and the periodic daily 06:34 time-range configuration commands.

•The time zone is based on the end point.

–If EnergyWise is not running on the end point (for example, a PoE end point), the specified time is based on the switch time zone.

–If an agent or client is running on the end point, the specified time is based on the end-point time zone.

•If you configure the switch to power on an end point or a PoE port at a specific time, it powers on within 1 minute, for example, between 0700 and 0701.

•If you configure the same recurring event for multiple end points, they all power on within 1 minute.

Note See the Release Notes for Cisco EnergyWise, EnergyWise Phase 2 on Cisco.com for software releases with Cisco EnergyWise Phase 2.

•When you use the day_of_month and the day_of_week in the energywise level level recurrence importance importance at minute hour day_of_month month day_of_week interface configuration command in an EnergyWise Phase 2 software release:

–The recurring event occurs when either the day_of_month or the day_of_week occurs first in releases earlier than the EnergyWise Phase 2 releases.

If you specify both the day_of_month and the day_of_week, the event occurs when either the day_of_month or the day_of_week is first.

If you specify the day_of_month and use a wildcard (*) for the day_of_week, the event occurs on the day_of_month.

 

Cisco EnergyWise Configuration Guide

1-10

OL-19806-03

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Cisco EnergyWise Configuration Guide Americas HeadquartersCisco EnergyWise Configuration Guide N T E N T S Important Notice C-1 Audience PurposeConventions Preface Related Publications For information about the Cisco network devices, seeObtaining Documentation, Support, and Security Guidelines Managing Single Entities Overview Network management stations Domain membersCreating an EnergyWise Domain Power Levels Category Level DescriptionRecurring Event Definition DefaultsAttributes Secure Domain CommunicationMIBs Switch Connected to an IP Phone Management station Domain memberSwitch Connected to a PC Switch and PC ScenarioConfiguration Guidelines Cisco EnergyWise Configuration Guide Using the Call In-Progress Feature This is the configuration for the PoE portEnergyWise Entity PoE Mode Auto Never Static PoE and EnergyWise InteractionsPreventing Network Access to a Non-Cisco End Point CLI Compatibility Issues PC without Access to the EnergyWise Network and the InternetManually Managing Power Enabling EnergyWise, Configuring Entity Attributes,Command Purpose Energywise keywords word,word Shared-secret 0 7 mgmt-password portEnergywise importance importance Energywise management securityEnergywise role role Energywise name nameEnergywise neighbor hostname ip-address Energywise allow query save setEnergywise level level Copy running-config startup-configInterface interface-id Show energywise childrenEnergywise name name Energywise role roleEnergywise activitycheck Configuring Recurring EventsShow running-config Energywise allow query setMonday , Tuesday , Wednesday , Thursday , Friday Copy running-config startup-config Energywise level level recurrence importanceShow energywise recurrence Command Mode Purpose Dayofmonth month Dayofweek timerangeDisabling EnergyWise To power on the lab IP phones ExamplesAutomatically Managing Power To power off anIP phone connected to a PoE portIf the time range has end times and days such as Pc-mgrManaging Multiple Entities Running QueriesManaging Multiple Entities Running Queries Multiple Switches Connected to Multiple End Points Management station End point Domain memberEnergywise query importance importance Using Queries to Manage Power in the DomainDelta usage timeout timeout Keywords word,word, ... name name collectOptional Runs a query to power on or off the domain members Keywords word,word, ... name name set levelQuerying with the Name Attribute Setting the Time-Out Value Verify the power levelsOL-19806-03 EnergyWise CLI Commands Clear energywise neighbors Endpoint Debug energywiseDebug energywise endpoint management ManagementSave-Responds to a query to save the running configuration Energywise global configurationDomain member, configures the switch to Energywise allow query save setNeighbor hostname Level levelName name Role roleNeighbors are not assigned Role is the model number KeywordsAllow query save set keywords were added Management passwords Activitycheck Energywise interface configurationNo energywise domain Allow query setImportance importance Keywords word,wordRecurrence Time-rangeCommand Default Command Modes Command History SecurityUdp port Absolute Command Description Ntp-shared-secret Energywise domainSecurity Protocol udp portCommand Modes Command History Related Commands DescriptionUsage Guidelines Examples Timeout timeout Energywise queryCollect delta usage Members and end points Set level levelSum delta usage Delta-Display the delta vectorSwitch# energywise query importance 90 name * collect delta These examples show how to filter results with keywords Switch# energywise query importance 90 name * set levelLevel-change Snmp-server enable traps energywiseEvent-occured Neighbor-addedTo send EnergyWise traps to the NMS To send only EnergyWise event traps to the NMSShow energywise Switch# show energywise children Domain Cisco Protocol Statistics Energywise interface configuration Energywise global configurationEnables and configures EnergyWise on the entity Configures EnergyWise on the PoE portOL-19806-03 Using CLI Commands Verifying the Power Usage Cisco EnergyWise and Catalyst 4500 Switches OL-19806-03 Cisco EnergyWise and Catalyst 6500 Switches OL-19806-03 Important Notice DisclaimerCisco EnergyWise Configuration Guide Statement 1071-Warning Definition Bewaar Deze InstructiesWarnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Guarde Estas InstruçõesGEM Disse Anvisninger Page OL-19806-03
Top Page Image Contents