Cisco Systems OL-19806-03 manual Keywords word,word, Recurrence, Importance importance, Time-range

Page 53

Chapter 3 EnergyWise CLI Commands

energywise (interface configuration)

keywords word,word

(Optional) Assigns at least one keyword for the port.

 

When assigning multiple keywords, separate the keywords with commas,

 

and do not use spaces between keywords.

 

• You can enter alphanumeric characters and symbols such as #, (, $, !, and

 

&.

 

• Do not enter an asterisk (*) or a blank space between the characters or

 

symbols.

 

 

level level

(Optional) Sets the power level of the port.

 

The range is from 0 and 10.

 

• To power off the end point, enter 0.

 

• To power on the end point

 

– If it is a PoE end point, enter 10.

 

– If it is not, enter a power level from 1 to 10. The end point

 

determines the appropriate action.

 

 

recurrence

(Optional) Schedules the power-on or power-off event.

importance importance

• importance importance—The event occurs if the importance value of

{at minute hour

the end point is less than or equal to the specified importance value. The

day_of_month month

range is from 1 to 100.

day_of_week

• at minute hour day_of_month month day_of_week—Specifies the time

time-range

time-range-name}

(24-hour format) in cron format for the recurring event.

 

– minute—The range is from 0 to 59. Use * for the wildcard.

 

– hour—The range is from 0 to 23. Use * for the wildcard.

 

– day_of_month—The range is from 1 to 31. Use * for the wildcard.

 

– month—The range is from 1 (January) to 12 (December). Use * for

 

the wildcard.

 

– day_of_week—The range is from 0 (Sunday) to 7 (Sunday). Use *

 

for the wildcard.

 

• time-rangetime-range-name—Specifies the time range name for the

 

recurring event.

 

The event uses the switch time.

 

 

name name

(Optional) Specifies the EnergyWise-specific port name.

 

• You can enter alphanumeric characters and symbols such as #, (, %, !,

 

and &.

 

• Do not enter an asterisk (*) or a blank space between the characters or

 

symbols.

 

 

Cisco EnergyWise Configuration Guide

 

OL-19806-03

3-9

 

 

 

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Americas Headquarters Cisco EnergyWise Configuration GuideCisco EnergyWise Configuration Guide N T E N T S Important Notice C-1 Conventions AudiencePurpose Preface For information about the Cisco network devices, see Related PublicationsObtaining Documentation, Support, and Security Guidelines Managing Single Entities Overview Domain members Network management stationsCreating an EnergyWise Domain Category Level Description Power LevelsAttributes Definition DefaultsRecurring Event Secure Domain CommunicationMIBs Management station Domain member Switch Connected to an IP PhoneSwitch and PC Scenario Switch Connected to a PCConfiguration Guidelines Cisco EnergyWise Configuration Guide This is the configuration for the PoE port Using the Call In-Progress FeaturePoE and EnergyWise Interactions EnergyWise Entity PoE Mode Auto Never StaticPreventing Network Access to a Non-Cisco End Point PC without Access to the EnergyWise Network and the Internet CLI Compatibility IssuesEnabling EnergyWise, Configuring Entity Attributes, Manually Managing PowerCommand Purpose Energywise importance importance Shared-secret 0 7 mgmt-password portEnergywise keywords word,word Energywise management securityEnergywise neighbor hostname ip-address Energywise name nameEnergywise role role Energywise allow query save setInterface interface-id Copy running-config startup-configEnergywise level level Show energywise childrenEnergywise role role Energywise name nameShow running-config Configuring Recurring EventsEnergywise activitycheck Energywise allow query setMonday , Tuesday , Wednesday , Thursday , Friday Show energywise recurrence Copy running-config startup-configEnergywise level level recurrence importance Disabling EnergyWise Command Mode PurposeDayofmonth month Dayofweek timerange Examples To power on the lab IP phonesTo power off anIP phone connected to a PoE port Automatically Managing PowerPc-mgr If the time range has end times and days such asRunning Queries Managing Multiple EntitiesManaging Multiple Entities Running Queries Management station End point Domain member Multiple Switches Connected to Multiple End PointsDelta usage timeout timeout Using Queries to Manage Power in the DomainEnergywise query importance importance Keywords word,word, ... name name collectKeywords word,word, ... name name set level Optional Runs a query to power on or off the domain membersQuerying with the Name Attribute Verify the power levels Setting the Time-Out ValueOL-19806-03 EnergyWise CLI Commands Clear energywise neighbors Debug energywise endpoint management Debug energywiseEndpoint ManagementDomain member, configures the switch to Energywise global configurationSave-Responds to a query to save the running configuration Energywise allow query save setName name Level levelNeighbor hostname Role role Allow query save set keywords were added Neighbors are not assigned Role is the model number Keywords Management passwords No energywise domain Energywise interface configurationActivitycheck Allow query setRecurrence Keywords word,wordImportance importance Time-rangeUdp port Command Default Command Modes Command HistorySecurity Absolute Command Description Security Energywise domainNtp-shared-secret Protocol udp portUsage Guidelines Examples Command Modes Command HistoryRelated Commands Description Collect delta usage Timeout timeoutEnergywise query Sum delta usage Set level levelMembers and end points Delta-Display the delta vectorSwitch# energywise query importance 90 name * collect delta Switch# energywise query importance 90 name * set level These examples show how to filter results with keywordsEvent-occured Snmp-server enable traps energywiseLevel-change Neighbor-addedTo send only EnergyWise event traps to the NMS To send EnergyWise traps to the NMSShow energywise Switch# show energywise children Domain Cisco Protocol Statistics Enables and configures EnergyWise on the entity Energywise global configurationEnergywise interface configuration Configures EnergyWise on the PoE portOL-19806-03 Using CLI Commands Verifying the Power Usage Cisco EnergyWise and Catalyst 4500 Switches OL-19806-03 Cisco EnergyWise and Catalyst 6500 Switches OL-19806-03 Disclaimer Important NoticeCisco EnergyWise Configuration Guide Bewaar Deze Instructies Statement 1071-Warning DefinitionAvvertenza Importanti Istruzioni Sulla Sicurezza Warnung Wichtige SicherheitshinweiseGuarde Estas Instruções Aviso Instruções Importantes DE SegurançaGEM Disse Anvisninger Page OL-19806-03
Top Page Image Contents