Cisco Systems OL-19806-03 manual Monday , Tuesday , Wednesday , Thursday , Friday

Page 31

Chapter 1 Managing Single Entities

Configuring Recurring Events

	Command	Purpose

Step 4 absolute start hh:mm day_of_month month year		(Optional) Sets the start time and day for the recurring event.
		• hh:mm—Specifies the time (24-hour format) in hours and
		minutes.
		For example, 08:14 for 0814 and 20:55 is 2055.
		• day month year—Specifies the date.
		– day_of_month—The range is from 1 to 31. Use * for the
		wildcard.
		– month—The range is from January to December. Use *
		for the wildcard.
		– year—The minimum year is 1993.
Step 5
Step 5	periodic days_of_the_week hh:mm	(Optional) Sets the weekly start time and day for the recurring
		event.
		• days_of_the_week—Valid values are
		– Monday, Tuesday, Wednesday, Thursday, Friday,
		Saturday, or Sunday—Enter a single day, a range of
		days with a dash between the starting and ending days,
		or multiple days separated by a comma
		– daily—Enter if the recurring event starts from Monday
		to Sunday.
		– weekdays—Enter if the recurring event starts from
		Monday to Friday.
		– weekend—Enter if the event occurs on Saturday and
		Sunday.
		• hh:mm—Specifies the time (24-hour format) in hours and
		minutes.
		For example, 08:47 for 0847 and 23:05 is 2305.
Step 6
Step 6	interface interface-id	Specifies the port or a range of ports to be configured, and enters
		interface configuration mode.

		Cisco EnergyWise Configuration Guide
		Cisco EnergyWise Configuration Guide
	OL-19806-03			1-23
	OL-19806-03			1-23

Image 31

Contents Americas Headquarters Cisco EnergyWise Configuration GuideCisco EnergyWise Configuration Guide N T E N T S Important Notice C-1 Purpose AudienceConventions Preface For information about the Cisco network devices, see Related PublicationsObtaining Documentation, Support, and Security Guidelines Managing Single Entities Overview Domain members Network management stationsCreating an EnergyWise Domain Category Level Description Power LevelsSecure Domain Communication Definition DefaultsAttributes Recurring EventMIBs Management station Domain member Switch Connected to an IP PhoneSwitch and PC Scenario Switch Connected to a PCConfiguration Guidelines Cisco EnergyWise Configuration Guide This is the configuration for the PoE port Using the Call In-Progress FeaturePoE and EnergyWise Interactions EnergyWise Entity PoE Mode Auto Never StaticPreventing Network Access to a Non-Cisco End Point PC without Access to the EnergyWise Network and the Internet CLI Compatibility IssuesEnabling EnergyWise, Configuring Entity Attributes, Manually Managing PowerCommand Purpose Energywise management security Shared-secret 0 7 mgmt-password portEnergywise importance importance Energywise keywords word,wordEnergywise allow query save set Energywise name nameEnergywise neighbor hostname ip-address Energywise role roleShow energywise children Copy running-config startup-configInterface interface-id Energywise level levelEnergywise role role Energywise name nameEnergywise allow query set Configuring Recurring EventsShow running-config Energywise activitycheckMonday , Tuesday , Wednesday , Thursday , Friday Energywise level level recurrence importance Copy running-config startup-configShow energywise recurrence Dayofmonth month Dayofweek timerange Command Mode PurposeDisabling EnergyWise Examples To power on the lab IP phonesTo power off anIP phone connected to a PoE port Automatically Managing PowerPc-mgr If the time range has end times and days such asRunning Queries Managing Multiple EntitiesManaging Multiple Entities Running Queries Management station End point Domain member Multiple Switches Connected to Multiple End PointsKeywords word,word, ... name name collect Using Queries to Manage Power in the DomainDelta usage timeout timeout Energywise query importance importanceKeywords word,word, ... name name set level Optional Runs a query to power on or off the domain membersQuerying with the Name Attribute Verify the power levels Setting the Time-Out ValueOL-19806-03 EnergyWise CLI Commands Clear energywise neighbors Management Debug energywiseDebug energywise endpoint management EndpointEnergywise allow query save set Energywise global configurationDomain member, configures the switch to Save-Responds to a query to save the running configurationRole role Level levelName name Neighbor hostnameKeywords Neighbors are not assigned Role is the model numberAllow query save set keywords were added Management passwords Allow query set Energywise interface configurationNo energywise domain ActivitycheckTime-range Keywords word,wordRecurrence Importance importanceSecurity Command Default Command Modes Command HistoryUdp port Absolute Command Description Protocol udp port Energywise domainSecurity Ntp-shared-secretRelated Commands Description Command Modes Command HistoryUsage Guidelines Examples Energywise query Timeout timeoutCollect delta usage Delta-Display the delta vector Set level levelSum delta usage Members and end pointsSwitch# energywise query importance 90 name * collect delta Switch# energywise query importance 90 name * set level These examples show how to filter results with keywordsNeighbor-added Snmp-server enable traps energywiseEvent-occured Level-changeTo send only EnergyWise event traps to the NMS To send EnergyWise traps to the NMSShow energywise Switch# show energywise children Domain Cisco Protocol Statistics Configures EnergyWise on the PoE port Energywise global configurationEnables and configures EnergyWise on the entity Energywise interface configurationOL-19806-03 Using CLI Commands Verifying the Power Usage Cisco EnergyWise and Catalyst 4500 Switches OL-19806-03 Cisco EnergyWise and Catalyst 6500 Switches OL-19806-03 Disclaimer Important NoticeCisco EnergyWise Configuration Guide Bewaar Deze Instructies Statement 1071-Warning DefinitionAvvertenza Importanti Istruzioni Sulla Sicurezza Warnung Wichtige SicherheitshinweiseGuarde Estas Instruções Aviso Instruções Importantes DE SegurançaGEM Disse Anvisninger Page OL-19806-03