Cisco Systems OL-19806-03 manual Command Purpose

Page 25

Chapter 1 Managing Single Entities

Manually Managing Power

•Powering the PoE Port, page 1-20

•Configuring Port Attributes, page 1-20

Enabling EnergyWise

Beginning in privileged EXEC mode:

 

 

Command

Purpose

 

Step 1

 

 

 

configure terminal

Enters global configuration mode.

 

Step 2

 

 

 

service password-encryption

(Optional) Enables password encryption.

 

 

 

If youset a hidden password in Step 3, enter this command.

 

Step 3

 

 

 

energywise domain domain-namesecurity

Enables EnergyWise on the entity, assigns the entity to a domain

 

 

{ntp-shared-secret shared-secret} [0 7]

with the specified domain-name, sets the domain security mode,

 

 

domain-password[protocol udp port

and sets the domain password to authenticate all communication

 

 

udp-port-number [interface interface-id ip

in the domain.

 

 

ip-address]]

• ntp-shared-secret—Sets a strong password with NTP. If the

 

 

 

 

 

 

time between members varies ±30 seconds, the entity drops

 

 

 

events.

 

 

 

• shared-secret—Sets a strong password without NTP.

 

 

 

For information about domain security, see the “Secure

 

 

 

Domain Communication” section.

 

 

 

• (Optional) 0—Uses an unencrypted password. This is the

 

 

 

default.

 

 

 

• (Optional) 7—Uses a hidden password.

 

 

 

If you do not enter 0 or 7, the default is 0.

 

 

 

• (Optional) port udp-port-number—Specifies the UDP port

 

 

 

that communicates with the domain.

 

 

 

The range is from 1 to 65000. The default is 43440.

 

 

 

• (Optional) interface interface-id—Specifies the port that

 

 

 

communicates with the domain if the IP address is

 

 

 

dynamically assigned.We recommend that you specify the

 

 

 

interface-id. You should use this in a bridged network.

 

 

 

• (Optional) ip ip-address—Specifies the IP address that

 

 

 

communicates with the domain if the interface is a switched

 

 

 

virtual interface (SVI) and VLAN trunking protocol (VTP)

 

 

 

pruning is enabled. You should use this in a routed network.

 

 

 

For the domain-name and domain-password

 

 

 

• You can enter alphanumeric characters and symbols such as

 

 

 

#, (, $, !, and &.

 

 

 

• Do not enter an asterisk (*) or a blank space between the

 

 

 

characters or symbols.

 

Step 4

 

 

 

end

Returns to privileged EXEC mode.

 

 

 

 

 

 

 

 

 

Cisco EnergyWise Configuration Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

OL-19806-03

 

 

1-17

 

 

 

 

 

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Americas Headquarters Cisco EnergyWise Configuration GuideCisco EnergyWise Configuration Guide N T E N T S Important Notice C-1 Purpose AudienceConventions Preface For information about the Cisco network devices, see Related PublicationsObtaining Documentation, Support, and Security Guidelines Managing Single Entities Overview Domain members Network management stationsCreating an EnergyWise Domain Category Level Description Power LevelsAttributes Definition DefaultsRecurring Event Secure Domain CommunicationMIBs Management station Domain member Switch Connected to an IP PhoneSwitch and PC Scenario Switch Connected to a PCConfiguration Guidelines Cisco EnergyWise Configuration Guide This is the configuration for the PoE port Using the Call In-Progress FeaturePoE and EnergyWise Interactions EnergyWise Entity PoE Mode Auto Never StaticPreventing Network Access to a Non-Cisco End Point PC without Access to the EnergyWise Network and the Internet CLI Compatibility IssuesEnabling EnergyWise, Configuring Entity Attributes, Manually Managing PowerCommand Purpose Energywise importance importance Shared-secret 0 7 mgmt-password portEnergywise keywords word,word Energywise management securityEnergywise neighbor hostname ip-address Energywise name nameEnergywise role role Energywise allow query save setInterface interface-id Copy running-config startup-configEnergywise level level Show energywise childrenEnergywise role role Energywise name nameShow running-config Configuring Recurring EventsEnergywise activitycheck Energywise allow query setMonday , Tuesday , Wednesday , Thursday , Friday Energywise level level recurrence importance Copy running-config startup-configShow energywise recurrence Dayofmonth month Dayofweek timerange Command Mode PurposeDisabling EnergyWise Examples To power on the lab IP phonesTo power off anIP phone connected to a PoE port Automatically Managing PowerPc-mgr If the time range has end times and days such asRunning Queries Managing Multiple EntitiesManaging Multiple Entities Running Queries Management station End point Domain member Multiple Switches Connected to Multiple End PointsDelta usage timeout timeout Using Queries to Manage Power in the DomainEnergywise query importance importance Keywords word,word, ... name name collectKeywords word,word, ... name name set level Optional Runs a query to power on or off the domain membersQuerying with the Name Attribute Verify the power levels Setting the Time-Out ValueOL-19806-03 EnergyWise CLI Commands Clear energywise neighbors Debug energywise endpoint management Debug energywiseEndpoint ManagementDomain member, configures the switch to Energywise global configurationSave-Responds to a query to save the running configuration Energywise allow query save setName name Level levelNeighbor hostname Role roleKeywords Neighbors are not assigned Role is the model numberAllow query save set keywords were added Management passwords No energywise domain Energywise interface configurationActivitycheck Allow query setRecurrence Keywords word,wordImportance importance Time-rangeSecurity Command Default Command Modes Command HistoryUdp port Absolute Command Description Security Energywise domainNtp-shared-secret Protocol udp portRelated Commands Description Command Modes Command HistoryUsage Guidelines Examples Energywise query Timeout timeoutCollect delta usage Sum delta usage Set level levelMembers and end points Delta-Display the delta vectorSwitch# energywise query importance 90 name * collect delta Switch# energywise query importance 90 name * set level These examples show how to filter results with keywordsEvent-occured Snmp-server enable traps energywiseLevel-change Neighbor-addedTo send only EnergyWise event traps to the NMS To send EnergyWise traps to the NMSShow energywise Switch# show energywise children Domain Cisco Protocol Statistics Enables and configures EnergyWise on the entity Energywise global configurationEnergywise interface configuration Configures EnergyWise on the PoE portOL-19806-03 Using CLI Commands Verifying the Power Usage Cisco EnergyWise and Catalyst 4500 Switches OL-19806-03 Cisco EnergyWise and Catalyst 6500 Switches OL-19806-03 Disclaimer Important NoticeCisco EnergyWise Configuration Guide Bewaar Deze Instructies Statement 1071-Warning DefinitionAvvertenza Importanti Istruzioni Sulla Sicurezza Warnung Wichtige SicherheitshinweiseGuarde Estas Instruções Aviso Instruções Importantes DE SegurançaGEM Disse Anvisninger Page OL-19806-03
Top Page Image Contents