Cisco Systems OL-19806-03 manual Energywise level level recurrence importance

Chapter 1 Managing Single Entities

Configuring Recurring Events

	Command	Purpose
Step 7
	energywise level level recurrence importance	(Optional) Schedules a power-on or power-off event.
	importance {at minute hour day_of_month	• level level —Specifies the power level
	month day_of_week time-range
		– To power off the end point, enter 0.
	time-range-name}
		– To power on the end point
		If it is a PoE end point, enter 10.
		If it is another powered device, enter a power level from
		1 to 10. The end point determines the appropriate action.
		• importance importance—The event occurs if the importance
		value of the end point is less than or equal to the importance
		value. The range is from 1 to 100.
		• at minute hour day_of_month month
		day_of_week—Specifies the time (24-hour format) in cron
		format for the recurring event.
		– minute—The range is from 0 to 59. Use * for the
		wildcard.
		– hour—The range is from 0 to 23. Use * for the wildcard.
		– day_of_month—The range is from 1 to 31. Use * for the
		wildcard.
		– month—The range is from 1 (January) to 12 (December).
		Use * for the wildcard.
		– day_of_week—The range is from 0 (Sunday) to 7
		(Sunday). Use * for the wildcard.
		• time-rangetime-range-name—Specifies the time range for
		the recurring event.
		The event uses the switch time.
		Repeat this step to schedule another event.
Step 8
	end	Returns to privileged EXEC mode.
Step 9
	show energywise recurrence	Verifies your entries.
Step 10
	copy running-config startup-config	(Optional) Saves your entries in the configuration file.

	Cisco EnergyWise Configuration Guide
1-24	OL-19806-03