Cisco Systems NSS4000, NSS6000 manual Option B Standalone Environment Login Steps

Page 19

Chapter

Getting Started Guide

3

 

Option B: Standalone Environment Login Steps

To log into the configuration interface:

1.If you are logging into the NSS for the first time, write down the MAC address located on the sticker attached to the bottom of the chassis. You need the MAC address as this is part of the default hostname. Otherwise, skip this step.

2.There are a variety of ways to display the NSS Login window.

Open the Web browser on your computer: In the Address field, enter “http://NAS<MAC address>” (For example, “http://NAS0018F804E44C”.)

Browse for the NSS from the My Network Places window.

Select the NSS to a network drive from a mapped network drive. The NSS Login window appears:

3.Enter the administrator login information. When you first log into the configuration interface or if you reset the factory defaults, both the username and password are set to “admin”.

4. Click OK.

Chapter 3: Configuring the Network Storage System

17

(NSS)

 

Image 19
Contents Getting Started Guide Page Contents LEDs & Buttons About this Guide BenefitsRecommended Installation Sequence Introduction Recommended Installation Sequence Chapter Install the Disk Drives Part a Set up the HardwareSetting up the Hardware Approved Vendor List for Drives Install the Ethernet LinksInstall the Power NSS-supported UPS Product Families Chapter Part B Configure the Network Storage System NSS Configuring the Network Storage System NSS Option a Linksys One Environment Login Steps Log into the Configuration InterfaceLog into the Configuration Interface Option B Standalone Environment Login Steps Configure the Timing Settings Create a RAID Array Create a RAID Array Create a Volume Create a Volume Exporting Storage to your Network Virtualize Storage within your NetworkCreating Virtualized Storage Configure the NSS Network Identification Network Identification page appears Chapter Configure the User/Group Ranges and Home Directory Location Creating a User Profile Create any Locally Defined Users and GroupsNew User page appears Creating a Group Create a Share Chapter DFS Root Set the share to be a Microsoft DFS root Adding a DFS Shared Folder Chapter Chapter Restrictions using Microsoft DFS from the NSS Create a Snapshot for a VolumeChapter Create a Scheduled Backup for a Share Chapter Complete the Configuration Save the Current Configuration Getting Sarted Guide Windows Users Accessing the NSS Storage using CIFS/SMB Part C Instruct Your Users How to Access the NSS StorageUNIX/Linux Users Accessing Storage through NFS Windows Users Accessing the NSS Storage through FTPMac Users Accessing Storage through CIFS/SMB UNIX/Linux Users Accessing Storage through FTPMac Users Accessing Storage through FTP LEDs & Buttons Power LED Front PanelSystem LED Front Panel Reset Button Front PanelHard Disk Drive LEDs Front Panel LAN LEDs Front PanelUPS LED Back Panel USB LED Front PanelLinksys One Contact Information Support Contact Information