Cisco Systems NSS6000, NSS4000 manual Complete the Configuration

Page 44

Chapter

3

Getting Sarted Guide

 

The Select Backup Schedule page appears.

7.Select the backup frequency as one of the following:

Daily: Select each day on which you want the backup to occur.

Weekly: Select the day of the week on which you want the backup to occur.

Monthly: Select the day of the month on which you want the backup to occur. Make sure you select a day that is 28 or less. If you select the 29th, 30th or 31st day, the backup does not run during months that do not contain that day.

8.In the Run Backup at field, set up the specific time (hour:minute) at which time the backup occurs. When setting the hour, use the 24-hour clock.

9.To set up a backup that backs up just the changes made to the share since the last backup, click Incremental Backups. Leave it unchecked to take a full backup of the share each time the backup is run.

10.Click OK.

Step 13: Complete the Configuration

There are a number of configuration options not listed in this guide (for example, you can set up Email Alerts, SNMP alerts, VLANs, and so on). You can find the full details in the Administrator Guide which you can access either through the Online Help. The Online Help is part of the Configuration Manager or you can download the pdf version of the Administrator Guide from the Linksys website (www.linksys.com).

42

Chapter 3: Configuring the Network Storage System (NSS)

 

Step 13: Complete the Configuration

Image 44
Contents Getting Started Guide Page Contents LEDs & Buttons Benefits About this GuideRecommended Installation Sequence Introduction Recommended Installation Sequence Chapter Part a Set up the Hardware Install the Disk DrivesSetting up the Hardware Install the Ethernet Links Approved Vendor List for DrivesInstall the Power NSS-supported UPS Product Families Chapter Part B Configure the Network Storage System NSS Configuring the Network Storage System NSS Log into the Configuration Interface Option a Linksys One Environment Login StepsLog into the Configuration Interface Option B Standalone Environment Login Steps Configure the Timing Settings Create a RAID Array Create a RAID Array Create a Volume Create a Volume Virtualize Storage within your Network Exporting Storage to your NetworkCreating Virtualized Storage Configure the NSS Network Identification Network Identification page appears Chapter Configure the User/Group Ranges and Home Directory Location Create any Locally Defined Users and Groups Creating a User ProfileNew User page appears Creating a Group Create a Share Chapter DFS Root Set the share to be a Microsoft DFS root Adding a DFS Shared Folder Chapter Chapter Create a Snapshot for a Volume Restrictions using Microsoft DFS from the NSS Chapter Create a Scheduled Backup for a Share Chapter Complete the Configuration Save the Current Configuration Getting Sarted Guide Part C Instruct Your Users How to Access the NSS Storage Windows Users Accessing the NSS Storage using CIFS/SMBWindows Users Accessing the NSS Storage through FTP UNIX/Linux Users Accessing Storage through NFSUNIX/Linux Users Accessing Storage through FTP Mac Users Accessing Storage through CIFS/SMBMac Users Accessing Storage through FTP Power LED Front Panel LEDs & ButtonsReset Button Front Panel System LED Front PanelLAN LEDs Front Panel Hard Disk Drive LEDs Front PanelUSB LED Front Panel UPS LED Back PanelSupport Contact Information Linksys One Contact Information