Cisco Systems NSS4000, NSS6000 manual Chapter

Page 39

Chapter

Getting Started Guide

3

 

The Add Folder page appears.

4.Select one of the following:

Add a Folder to DFS: Select this option to create a single DFS shared folder. Fill in the following fields from the Add DFS Shared Folder table:

-Link Name: This is the name of the link that appears as a folder within the share. When users click this link, they are redirected to the target share on the remote server. Enter any name of up to 255 characters.

-Server Name: Enter the name of the remote server on which the target share is located.

-Share: Enter the name of the target share.

Import an Entire Remote Server: Select this option to automatically create links for all shares on the remote server. Fill in the following fields from the Import Remote Server table:

-Server Name: Enter the name of the remote server.

-Username: Enter the username of the account with access to the server.

-Password: Enter the password for the above account.

5.If you are adding a folder to DFS, click OK. If you are importing a remote server, click Import.

NOTE: Make sure you review the restrictions and recommendations for using Microsoft DFS from the NSS.

Chapter 3: Configuring the Network Storage System

37

(NSS)

 

Image 39
Contents Getting Started Guide Page Contents LEDs & Buttons About this Guide BenefitsRecommended Installation Sequence Introduction Recommended Installation Sequence Chapter Install the Disk Drives Part a Set up the HardwareSetting up the Hardware Approved Vendor List for Drives Install the Ethernet LinksInstall the Power NSS-supported UPS Product Families Chapter Part B Configure the Network Storage System NSS Configuring the Network Storage System NSS Option a Linksys One Environment Login Steps Log into the Configuration InterfaceLog into the Configuration Interface Option B Standalone Environment Login Steps Configure the Timing Settings Create a RAID Array Create a RAID Array Create a Volume Create a Volume Exporting Storage to your Network Virtualize Storage within your NetworkCreating Virtualized Storage Configure the NSS Network Identification Network Identification page appears Chapter Configure the User/Group Ranges and Home Directory Location Creating a User Profile Create any Locally Defined Users and GroupsNew User page appears Creating a Group Create a Share Chapter DFS Root Set the share to be a Microsoft DFS root Adding a DFS Shared Folder Chapter Chapter Restrictions using Microsoft DFS from the NSS Create a Snapshot for a VolumeChapter Create a Scheduled Backup for a Share Chapter Complete the Configuration Save the Current Configuration Getting Sarted Guide Windows Users Accessing the NSS Storage using CIFS/SMB Part C Instruct Your Users How to Access the NSS StorageUNIX/Linux Users Accessing Storage through NFS Windows Users Accessing the NSS Storage through FTPMac Users Accessing Storage through CIFS/SMB UNIX/Linux Users Accessing Storage through FTPMac Users Accessing Storage through FTP LEDs & Buttons Power LED Front PanelSystem LED Front Panel Reset Button Front PanelHard Disk Drive LEDs Front Panel LAN LEDs Front PanelUPS LED Back Panel USB LED Front PanelLinksys One Contact Information Support Contact Information