Cisco Systems NSS4000, NSS6000 manual Configure the NSS Network Identification

Page 27

Chapter

Getting Started Guide	3

The RAID page appears.

Exported disks from other NSS units in the network appear in the New RAID Device table.

3.From the New RAID Device table, click the disks or arrays that you want to include in the JBOD.

4.Select JBOD as the RAID level.

5.Click Add.

The JBOD appears in the RAID Arrays listing. You can now create volumes from the virtualized JBOD.

Step 7: Configure the NSS Network Identification

To configure the NSS network identity:

1. From the Manager Menu, click Network Identification.

Chapter 3: Configuring the Network Storage System	25
(NSS)

Image 27

Contents Getting Started Guide Page Contents LEDs & Buttons About this Guide BenefitsRecommended Installation Sequence Introduction Recommended Installation Sequence Chapter Install the Disk Drives Part a Set up the HardwareSetting up the Hardware Approved Vendor List for Drives Install the Ethernet LinksInstall the Power NSS-supported UPS Product Families Chapter Part B Configure the Network Storage System NSS Configuring the Network Storage System NSS Option a Linksys One Environment Login Steps Log into the Configuration InterfaceLog into the Configuration Interface Option B Standalone Environment Login Steps Configure the Timing Settings Create a RAID Array Create a RAID Array Create a Volume Create a Volume Exporting Storage to your Network Virtualize Storage within your NetworkCreating Virtualized Storage Configure the NSS Network Identification Network Identification page appears Chapter Configure the User/Group Ranges and Home Directory Location Creating a User Profile Create any Locally Defined Users and GroupsNew User page appears Creating a Group Create a Share Chapter DFS Root Set the share to be a Microsoft DFS root Adding a DFS Shared Folder Chapter Chapter Restrictions using Microsoft DFS from the NSS Create a Snapshot for a VolumeChapter Create a Scheduled Backup for a Share Chapter Complete the Configuration Save the Current Configuration Getting Sarted Guide Windows Users Accessing the NSS Storage using CIFS/SMB Part C Instruct Your Users How to Access the NSS StorageUNIX/Linux Users Accessing Storage through NFS Windows Users Accessing the NSS Storage through FTPMac Users Accessing Storage through CIFS/SMB UNIX/Linux Users Accessing Storage through FTPMac Users Accessing Storage through FTP LEDs & Buttons Power LED Front PanelSystem LED Front Panel Reset Button Front PanelHard Disk Drive LEDs Front Panel LAN LEDs Front PanelUPS LED Back Panel USB LED Front PanelLinksys One Contact Information Support Contact Information