Cisco Systems manual Eeprom contents hex Value VIP4 Model

VIP4 Overview

Using the show diag command, you can distinguish between the VIP4-50 and VIP4-80, as indicated in the following example, and in Table 1.

Table 1 Distinguishing the VIP4 Models

EEPROM contents (hex) Value	VIP4 Model
0x31	VIP4-50
0x22	VIP4-80

In the example below, the VIP is a VIP4-80:

Router# show diag 1

Slot 1:

Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status:None

EEPROM format version 1

VIP4-80 RM7000 controller, HW rev 2.01, board revision A0

Serial number:14773010					Part number:73-3143-02
Test history:0x00					RMA number:00-00-00
Flags:cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20:01	22 02	01	00	E1	6B	12 49	0C	47	02 00 00	00	00
0x30:50	06 00	00	00	00	00	00 00	00	00	00 00 00	00	00
Slot database information:
Flags:0x4		Insertion time:0x5168						(2w1d ago)
Controller Memory Size:64 MBytes CPU								SDRAM, 64 MBytes Packet

SDRAM

PA Bay 0 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL

EEPROM format version 1

HW rev 1.00, Board revision A0

Serial number:03536381 Part number:73-1688-03

PA Bay 1 Information:

Dual Port Fast Ethernet (RJ45), 2 ports

EEPROM format version 4

HW rev 1.00, Board revision 04

Serial number:MIC043929WV Part number:73-5419-03

--Boot log begin--

Cisco Internetwork Operating System Software

IOS (tm) VIP Software (SVIP-DW-M), Version 12.0(16.5)S, EARLY DEPLOYMENT

MAINTENANCE INTERIM SOFTWARE

TAC Support:http://www.cisco.com/cgi-bin/ibld/view.pl?i=support

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Thu 29-Mar-01 16:33 by ninahung

Image text-base:0x60010938, data-base:0x60340000

--Boot log end--

Fourth Generation Versatile Interface Processor (VIP4) Installation and Configuration Guide

4 OL-3673-01