Cisco Systems Connecting Cables, Global Site Selector 4490 Back Panel Ports and Receptacles

Chapter 3 Installing the Cisco Global Site Selector 4490

Connecting Cables

Connecting Cables

To connect network and console cables to your GSS 4490, follow these steps.

1.For network connections, insert a Category 5 UTP cable into the Ethernet 0 or Ethernet 1 receptacle on the GSS 4490 back panel (Figure 3-9).

2.Connect the other end of the network cable to a hub or switch in your network.

3.For console connections, plug the cable into the console port on the GSS 4490 back panel.

4.Connect the other end of the console cable to a console or a communications server.

Figure 3-9 Global Site Selector 4490 Back Panel Ports and Receptacles

1

97214

2 3 4

1	AC power receptacle	2	Ethernet 0 receptacle
3	Ethernet 1 receptacle	4	Console port

	Cisco Global Site Selector 4490 Hardware Installation Guide
3-14	78-15755-01