Cisco Systems 1200 manual Category Access Point with 802.11b or 802.11g Radio

Appendix C Access Point Specifications

Table C-1	Access Point Specifications (continued)
Category		Access Point with 802.11b or 802.11g Radio		Access Point with 802.11a Radio Module
Power Output		Autonomous access points:		Autonomous access points:
		•	With 802.11b radio:	• RM20A radio module:
			100, 50, 30, 20, 5, or 1 mW	16 dBm
		•	With 802.11g radio:	13 dBm
				10 dBm
			100, 50, 30, 20, 5, or 1 mW
				7 dBm
			(at 1, 2, 5.5, and 11 Mbps)	• RM21A radio module or RM22A radio module:
			30, 20, 10, 5, or 1 mW
				17 dBm
			(at 6, 9, 12, 18, 24, 48, and 54 Mbps)
				15 dBm
		Lightweight access points:
				14 dBm
		• At 1, 2, 5.5, and 11 Mbps		11 dBm
				10 dBm
			100 mW (20 dBm)
				8 dBm
			50 mW (17 dBm)
				5 dBm
			25 mW (14 dBm)
				2 dBm
			10 mW (11 dBm)
				–1 dBm
			5 mW (8 dBm)
				Lightweight access points:
			3 mW (5 dBm)
			1 mW (2 dBm)	• RM21A radio module or RM22A radio module:
			0.5 mW (-1 dBm)	17 dBm
		• At 6, 9, 12, 18, 24, 48, and 54 Mbps
				14 dBm
			30 mW (15 dBm)	11 dBm
				8 dBm
			15 mW (12 dBm)
				5 dBm
			8 mW (9 dBm)
				2 dBm
			4 mW (6 dBm)
				–1 dBm
			2 mW (2 dBm)
			1 mW (–1 dBm)	Note These values are based on the FCC peak
		(Depending on the regulatory domain in		measurement method as defined in
				FCC 15.407 (A)(4)
		which the access point is installed)
				(Depending on the regulatory domain in which the
				access point is installed)

Cisco Aironet 1200 Series Access Point Hardware Installation Guide

OL-8370-04 C-3