Colour monitor 4312 FA
Switching the monitor on/off
The ON/OFF switch (2) is used for switching the monitor on and off.
The power indicator (1) glows green when the monitor and system unit are switched on. The power indicator glows green and flashes when the monitor does not receive any video signal or is in the
When you switch on the PC system, you must proceed in the following order:
ÊFirst switch the LCD monitor on with the ON/OFF switch (2).
ÊThen switch on the system unit.
i | If your PC has a power management function |
"Notes on power management" of the monitor in this chapter. |
Notes on power management
If your PC is equipped with power management, the monitor can support this function fully. The monitor has a
Stage | ON | Standby mode | Suspend mode | OFF mode |
|
|
|
|
|
Power indicator | glows green | flashes green (1 s) | flashes green (1 s) | flashes green (1 s) |
|
|
|
|
|
Function | Monitor | Monitor | Monitor | Monitor |
| operating | is dark | is dark | is dark |
| normally |
|
|
|
|
|
|
|
|
Power | normal | reduced | reduced | reduced |
consumption | < 36 W | to < 5 W | to < 5 W | to < 5 W |
|
|
|
|
|
If your PC detects inactivity (no input) it sends an appropriate signal to the monitor to reduce the power consumption
Once an input is made at the PC the screen contents are redrawn and full power is restored.
For detailed information on how
When the monitor is switched to the
i system a power consumption of up to 5 W is maintained to feed the circuit for redrawing the screen contents.
To completely switch off the power consumption, switch off the system unit or pull the plug of the monitor power cable out of the monitor socket of the system unit.
English - 11 |