Colour monitor 4312 FA
•Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the chapter "Connecting the monitor".
•No data transmission cable should be connected or disconnected during a thunderstorm.
•Please ensure that no objects (e.g. necklaces, paperclips etc.) or liquids can get into the interior of the device (this may cause an electrical shock or short circuit).
•In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our customer service centre.
•The screen background lighting contains mercury. You must observe the applicable handling and disposal safety regulations for fluorescent tubes.
•If the LCD monitor is damaged (for example the glass is broken), avoid letting any liquids that may escape coming into contact with any part of your body (skin, mouth, nose) or foodstuffs. Clean parts of the body and clothing that have already come into contact with such liquids with plenty of soap and water.
Do not breathe in any of the escaping vapours. You should contact your doctor if you have breathed in fumes or come into contact with the liquid.
•Only qualified technicians should repair the device. Unauthorised opening and incorrect repair may greatly endanger the user (electric shock, fire risk).
•The power adapter may only be opened by authorised specialist personnel.
•You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or customer service centre.
•Keep this operating manual together with your device. If you pass on the device to third parties, you should include this manual.
Cleaning notes
•Always pull out the power plug before you clean the monitor.
•Do not clean any interior parts yourself, leave this job to a service technician.
•Do not use any cleaning agents that contain abrasives or may corrode plastic.
•Ensure that no liquid will run into the system.
•Ensure that the ventilation areas of the monitor are free.
•The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.
Wipe the monitor housing with a dry cloth. If the monitor is particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out.
Transport notes
•Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts.
•Never drop the LCD monitor (danger of glass breakage).
English - 3 |